▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [461 - 480 of 981]

CNC Machining Center

Dmg Mori NHX 4000

Germany

2017

used

on request

INNO28134

Travel X/Y/Z: 560mm/560mm/660mm, clamping surface: 400mm/400mm, spindle mount: HSK-A63, speed: 20000rpm, power: 25kW/35kW, torque: 130Nm/86Nm. Work table indexing: 0.001°, speed: 100 rpm. Tool positions: 40 + 60, ring magazine holder: BT40/SK/CAT40/HSK-A63, max. tool diameter: 70mm, max. tool length: 450mm, max. tool weight: 12kg. Including cooling lubricant system, chip conveyor, IKZ, filter system, oil mist separator and flow monitor. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/3000mm, weight: approx. 9500kg, control: CELOS with Siemens 840D sl Operate, operating hours: 41220h, spindle hours: 21663h. Documentation available. On-site inspection is possible.

Eccentric Press

Ebu H75F

Germany

unknown

used

on request

INNO28131

Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Donau Alpha

Germany

2010

used

on request

INNO28128

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

CNC Press Brake

Coastone Cone 1600

Germany

unknown

used

on request

INNO28127

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Welding Rotating Device

Reinartz Thieler 300 R

Germany

unknown

used

on request

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Surface Grinding Machine

Proth PSGS-3060AH

Germany

1987

used

on request

INNO28125

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Band Saw

Jaespa MSP-4

Germany

1990

used

on request

INNO28124

A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

CNC Circular Grinding Machine

Gp CNC 650

Germany

2012

used

on request

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Eccentric Press

Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F

Germany

1988

used

on request

INNO28120

Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.

Section Shear

Peddinghaus 219 Super 13 G

Germany

1984

used

on request

INNO28115

Bending capacity: angle iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, T-iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, max. U- and I-steel: NP 18, drive power: 3kW. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/2100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Cold Circular Saw

Trennjaeger LPC 110/400

Germany

1979

used

on request

INNO28114

Saw blade diameter: 360mm, cutting speed: 16m-50m/min, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1500mm, weight: approx. 1000kg. Cutting range at 90°: round: 110mm, square: 110mm, rectangular: 110mm/400mm. Cutting range at 45°: round: 110mm, square: 110mm, rectangular: 110mm/280mm. Documentation available. On-site inspection is possible.

Hardening Oven

Nabertherm Multitherm N7

Germany

1996

used

on request

INNO28108

Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

Corner Seam Welding Machine

Fröhlich/migatronic SAX700/Automig 273i

Germany

2018

used

on request

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Start Hole EDM Machine

Agie Charmilles Drill 11

Germany

2008

used

on request

INNO28096

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

CNC Vertical Machining Center

Dmg Mori CMX 600 V

Germany

2017

used

on request

INNO28095

Travel X/Y/Z: 600mm/560mm/510mm, accuracy X/Y/Z: 6µm, rapid traverse X/Y/Z: 30m/min, max. feed force: 5kN, max. feed: 30m/min, table dimensions X/Y: 900mm/560mm, max. table load: 600kg. Spindle speed: 12000rpm, drive power: 13kW, torque: 82Nm. Tool positions: 30, max. tool diameter free/occupied: 130mm/80mm, max. tool length: 300mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 3050mm/3500mm/2950mm, weight: approx. 5000kg, operating hours: 59667h, spindle hours: 16074h. Including internal coolant supply. Documentation available. On-site inspection is possible.

CNC Universal Milling Machine

Deckel FP 5 CC

Germany

unknown

used

on request

INNO28092

Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible.

CNC Cycle Lathe

Romi M 420

Germany

unknown

used

on request

INNO28091

A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible.

CNC Waterjet Cutting Machine

Stako Trium WPC

Germany

2016

used

on request

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Remaining Stock

Klopp/müller/reinhardt FWU 13-6/MPS2/RAS 52.80

Germany

1970

used

on request

INNO28076

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Deep Hole Drilling Machine

Heyligenstaedt

Germany

1951

used

on request

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.