Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1 - 20 of 2242]

Hinged Belt Conveyor

Mayfran MT 10

Germany

unknown

used

on request

INNO26854

Chain pitch: 31.75mm, chain roller diameter/width: 19mm/8mm, belt thickness: 2mm, belt width min./max.: 100mm/500mm, carrier height: 20mm, guide track thickness: 2.5mm, belt pulling force: 6400N, breaking load: 60000N, speed grades: 1/1.5/3m/min, max. central length: 6000mm. Documentation available.

Press Brake

Hämmerle AP 200-3600

Germany

1991

used

on request

INNO26853

Pressing force: 2000kN, working width: 3600mm, max. stroke: 400mm, throat depth: 500mm, stops: 6, control: DNC 7000, weight: approx. 21000kg. Including various lower tools and dies with bolts as well as a holding rail. For example, prisms 7-90 and punches (straight and cranked) are included. Documentation is available. On-site inspection is possible.

Complete Mozzarella Production Line

Dima

Germany

unknown

used

on request

INNO26852

A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets.

Screw Compressor

Atlas Copco GX5FF EP

Germany

2019

used

on request

INNO26851

There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available.

Slitter Rewinder

Goebel Practica 4

Germany

1979

used

on request

INNO26850

Max. Unwinding diameter: 1000mm, max. unwinding width: 1350mm, max. rewinding diameter: 400mm. Including various rewinding shafts (8mm-76mm), core hopper, roll separator, beater unit, film bander, shrink tunnel, various conveyor belts.

Roller Conveyor Belt

Germany

2016

used

on request

INNO26847

There are 2 pallet roller tracks available with separation and brake rollers at the end of the track. Format: pallets 1200mm/800mm, length: 4000mm, width: 1000mm.

Cylindrical Grinding Machine

Schaudt PF 43 U-M 1000

Germany

1990

used

on request

INNO26846

Grinding length: 1000mm, center height: 180mm, max. external grinding diameter: 360mm, max. internal grinding diameter: 260mm, max. internal grinding depth: 300mm, max. workpiece weight: 200kg. B-axis on workpiece holder headstock: 0-180°, B-axis positioning: 0.001°, headstock stroke: 320mm, workpiece holder slide stroke(Z): 1300mm, grinding wheel: 500mm/60mm/100mm/203mm, speed: 20-45m/sec. Internal grinding spindle diameter: 120mm, quill stroke: 60mm, Speed: 1200rpm. Dimensions X/Y/Z: 4340mm/2250mm/2200mm, weight: approx. 7100kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Batch Furnace System

Xerion XRetort

Germany

2015

used

on request

INNO26848

There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible.

EPS Cutting System

Styrodesign HVX

Germany

2008

used

on request

INNO26849

A complete StyroDesign EPS cutting system is available. The Styrodesign EPS cutting system is ideal for precise cutting of foam materials. Equipped with modern STYRODESIGN software, it offers optimum material utilization through advanced cutting path definition and nesting techniques. Documentation available.

Dedusting Unit

Ammann AFA-3095

Germany

2016

used

on request

INNO26841

A dedusting system for asphalt mixing plants is available. Extraction volume: 90,000Nm³/h, effective exhaust gas volume: 130,000m³/h, filter area: 1105m².

Injection Moulding Machine

Arburg 270M 500-210

Germany

1994

used

on request

INNO26844

Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.

Injection Moulding Machine

Arburg Allrounder 270M 350-90

Germany

1994

used

on request

INNO26843

Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.

Robot

Kuka/abb KR/IRB

Germany

2014

used

on request

INNO26842

There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) Kuka KR 140 L100-2 comp: Year of construction: 2008, operating hours: approx. 29000h. 3) Kuka KR 30-2: Year of manufacture: 2004, operating hours: approx. 53000h. 4) ABB IRB 1600-6/1,45: Year of construction: 2012, operating hours: approx. 25500h. 5) Kuka KR 30-2: Year of construction: 2011, operating hours: approx. 2000h. 6) ABB type: unknown: Year of construction: unknown, operating hours: approx. 1500h. 7) Kuka KR 140: Year of construction: 2006, operating hours: approx. 44000h, without control panel. All robots (except 7) including control unit and operating panel.

Heavy Wire Bonder

Hesse Bondjet 939

Germany

2012

used

on request

INNO26845

There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.

Riveting Machine

Haeger 824Plus-He

Germany

2014

used

on request

INNO26839

Pressing force: 71kN, projection: 610mm, max. stroke length: 220mm, output: 1400E/h, weight: approx. 1300kg.

Oven

Eliog KU 300

Germany

unknown

used

on request

INNO26840

Max. temperature: 300°C, internal dimensions X/Y/Z: 1000mm/1000mm/1500mm, external dimensions X/Y/Z: 1765mm/1425mm/2300mm, weight: 850kg.

Injection Moulding Machine

Arburg Allrounder 570C 2000-675

Germany

1999

used

on request

INNO26838

Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.

Milling Machine

Reiden BF 2 PR

Germany

1990

used

on request

INNO26837

Travel X/Y/Z: 1200mm/700mm/750mm, control: Heidenhain, table dimensions X/Y: 1200mm/630mm, speed: 2900rpm, weight: approx. 6500kg. Electronic problems, bearing locking in the gearbox.

Cleaning System

Rosink

Germany

unknown

used

on request

INNO26836

There are several machines, including 2x cleaning systems, hot tank, extraction system, granifrigor and fan, unknown crankshafts (presumably BR8000). All machines dismantled and partly ready for loading, crankshafts packed. On-site inspection is possible.

Injection Moulding Machine

Arburg Allrounder 420C 1300-350

Germany

1998

used

on request

INNO26835

Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On-site inspection is possible.