▷ Used plastics processing machines from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Plastics processing machines [121 - 140 of 181]

Injection Moulding Machine

Boy 55M

Germany

2005

used

on request

INNO27212

Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

Injection Moulding Machine

Arburg 270 S 250-100

Germany

2013

used

on request

INNO27208

Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module.

Injection Moulding Machine

Arburg 221/55-250

Germany

1979

used

on request

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

Injection Moulding Machine

Krauss Maffei 50-160 C1

Germany

1998

used

on request

INNO27158

Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller.

Temperature Control Device

Regloplas P140Smart/90Smart

Germany

2020

used

on request

INNO27126

Four Regloplast Smart series temperature control units are available. 3x Regloplast 90Smart, year of manufacture: 2018/2018/2016, T. max.: 90°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg, some float switches and display defective. 1x Regloplast P140Smart, year of manufacture: 2020, T.max.: 140°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.

Hot Runner Controller

Hummel Temp Star Master 24

Germany

2001

used

on request

INNO27056

Total output: 22kW, zone output: 3.6kW, temperature control range: 50°C-500 °C, accuracy: +/- 1°C, max. altitude: 2000m above sea level, max. humidity at 30°C: 80%, degree of soiling: 2. The machine often has to be switched on and off several times to get it going. Documentation available.

Screen Changer

Maag FSC 160

Germany

2009

used

on request

INNO27052

There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available.

PUR Foaming Plant

Hennecke HK135

Germany

2005

used

on request

INNO26994

A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible.

Ultrasonic Welding Plant

Kln Ultraschall Advance 900

Germany

2018

used

on request

INNO26900

Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available.

Handling Robot

Arburg Multilift H m. B-Achse

Germany

2019

used

on request

INNO26826

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

Injection Moulding Machine

Arburg Allrounder 680 CB 650-170

Germany

2018

used

on request

INNO26744

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.

Rotational Molding System

Reinhardt RSH40

Germany

2011

used

on request

INNO26673

A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.

Dry Cleaner

Wipa MD 1250

Germany

unknown

used

on request

INNO26556

Circumferential speed: 80m/s, an on-site inspection is possible.

Machining Center

Broetje Automation STAXX C1700

Germany

2018

used

on request

INNO26457

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible.

Pultrusion Machine

Kraussmaffei iPul Pultrusion

Germany

2015

used

on request

INNO26456

There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible.

Injection Moulding Machine

Arburg ALLROUNDER 900T 400-210

Germany

1997

used

on request

INNO26372

Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.

Pyrolysis Furnace

Econ EPO 300

Germany

2008

used

on request

INNO26041

Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible.

Injection Moulding Machine

Netstal e-jet

Germany

2004

used

on request

INNO25997

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

Strand Pelletising Systems

Erema HG 84D

Germany

2019

used

on request

INNO25952

Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction.

Injection Moulding Machine

Klöckner Ferromatik Desma W2700-27780

Germany

1986

used

on request

INNO25900

Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.