Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Plastics processing machines
Blow moulding machinery 4 Calenders and rolling mills 2 Complete production lines 1 Dryer 8 Extruder and extrusion lines 14 Foil processing machinery 1 Forms and tools 1 Granulating plants 6 Heating and cooling units 5 Injection moulding machinery 73 Mills 5 Other machinery 7 Peripheral equipment 4 Polyurethane processing machinery 3 Presses 2 Printing machinery 2 Processing and follow-on 9 Rubber processing machinery 2 Thermoforming machinery 2 Welding machinery 10 Winder 3 Window production machinery 14
Innovac used-machines Plastics processing machines [101 - 120 of 178]
Injection-Moulding-Machine-Arburg-Allrounder-520C-2000-675 used
Injection Moulding Machine
Arburg Allrounder 520C 2000-675
Germany
1998
used
on request
INNO28776
Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.
more
High-Pressure-PU-Mixing-and-Metering-System-Cannnon-A-Compact-40FC used
High-Pressure PU Mixing and Metering System
Cannnon A-Compact 40FC
Germany
2017
used
on request
INNO28738
A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Dr.-Boy-XS-100-14 used
Injection Moulding Machine
Dr. Boy XS 100-14
Germany
2013
used
on request
INNO28722
A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Engel-ES-VC-e-Motion used
Injection Moulding Machine
Engel ES/VC/e-Motion
Germany
2005
used
on request
INNO28721
A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible.
more
Extruder-Bandera-17kW-32kW-49kW used
Extruder
Bandera 17kW/32kW/49kW
Germany
1990
used
on request
INNO28542
A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.
more
CNC-4-Axis-Machining-Center-Maka-PM210X used
CNC 4 Axis Machining Center
Maka PM210X
Germany
2005
used
on request
INNO28374
A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible.
more
CNC-Welding-Machine-Hürner-WhiteLine-CNC-ECO-2.0-160 used
CNC Welding Machine
Hürner WhiteLine CNC ECO 2.0 160
Germany
2018
used
on request
INNO28359
Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.
more
Haul-Off-Graewe-BA-500-6 used
Haul-Off
Graewe BA 500/6
Germany
2008
used
on request
INNO28073
Max. pipe diameter: 500mm, power: 1.7kW, max. pipe thickness: 6mm, weight: approx. 4100kg. Documentation available. On-site inspection is possible.
more
Haul-Off-Ipm-TR-400-6 used
Haul-Off
Ipm TR 400/6
Germany
2000
used
on request
INNO28072
Max. pipe diameter: 400mm, power: 2.9kW, max. pipe thickness: 6mm. Documentation available. On-site inspection is possible.
more
Planetary-Saw-Graewe-PS-500 used
Planetary Saw
Graewe PS 500
Germany
2008
used
on request
INNO28071
A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.
more
Planetary-Saw-Ipm-TP-400 used
Planetary Saw
Ipm TP 400
Germany
2000
used
on request
INNO28070
A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.
more
Ultrasonic-Welding-System-Telsonic-Amtek-Gmbh used
Ultrasonic Welding System
Telsonic/ Amtek Gmbh
Germany
2014
used
on request
INNO27967
An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.
more
Ultrasonic-Welding-System-Telsonic-Maschinenbau-Raab-TSP-3000-1P used
Ultrasonic Welding System
Telsonic/ Maschinenbau Raab TSP-3000-1P
Germany
2010
used
on request
INNO27965
An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.
more
Ultrasonic-Welding-System-Telsonic-Ansotec-ULTRASONIC-USP-3000 used
Ultrasonic Welding System
Telsonic/ Ansotec ULTRASONIC USP 3000
Germany
2009
used
on request
INNO27963
Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-SELECTA-1200T-800-150 used
Injection Moulding Machine
Arburg SELECTA 1200T 800-150
Germany
2002
used
on request
INNO27826
Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.
more
Dry-Air-Generator-Piovan-DPM604 used
Dry Air Generator
Piovan DPM604
Germany
2018
used
on request
INNO27776
Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
more
End-Milling-Machine-Mla-M-12 used
End Milling Machine
Mla M 12
Germany
2006
used
on request
INNO27761
Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible.
more
Injection-Moulding-Machine-Krauss-Maffei-KM-250-1400-C1 used
Injection Moulding Machine
Krauss Maffei KM 250-1400 C1
Germany
2002
used
on request
INNO27744
Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.
more
Injection-Moulding-Machine-Krauss-Maffei-420-110-650-850 used
Injection Moulding Machine
Krauss Maffei 420/110/650/850
Germany
2016
used
on request
INNO27684
A total of 8 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible.
more
CNC-Welding-Machine-Kln-rudholzer-WNA-W-Warmnietanlage used
CNC Welding Machine
Kln/rudholzer WNA-W/Warmnietanlage
Germany
2013
used
on request
INNO27683
Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 2
Automation-technology 55
Beverage-filling-technology 39
Complete-production-lines 1
Construction-machinery 26
Energy-management 140
Food-processing-and-beverage 158
Material-storage 65
Materials-handling-technology 72
Measurement-and-testing 81
Medical-equipment 11
Metal-processing-machines 1136
Mining 6
Office-equipment 3
Other-machines 68
Packaging-machines 252
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 178
Printing-machines 73
Process-equipment-and-chemistry 176
Packaging-material-machinery 91
Robotics 34
Surplus-goods 5
Textile-machinery 89
Utility-vehicles 10
Woodworking-machines 98