▷ Used plastics processing machines from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Plastics processing machines [81 - 100 of 177]

Injection Moulding Machine

Husky H-PET230 AE RS95

Germany

2015

used

on request

INNO29564

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, paint mixing units and T-conveyor belt. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Battenfeld BA 1600/BA 500-200 CDK

Germany

2001

used

on request

INNO29500

Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.

Cutting Mill

Tria BM 35-30

Germany

2015

used

on request

INNO29466

A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Vent Fittings Assemly Table

Schüco FPM 350 AV

Germany

2012

used

on request

INNO29435

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

Corner Jointing Machine

Schüco CC 120 A

Germany

2008

used

on request

INNO29434

Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich.

Glazing Press

Polzer C-VKS 3502

Germany

unknown

used

on request

INNO29416

A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.

Glass Frame Saw

Schüco PGZ 45 90

Germany

2004

used

on request

INNO29409

A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible.

Injection Moulding Machine

Ferromatik E100

Germany

1995

used

on request

INNO29406

A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.

Regranulating System

Erema IntErema 756 K

Germany

2017

used

on request

INNO29371

Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible.

Rolling Plant

Berstorff (krauss Maffei)/engelsmann

Germany

1959

used

on request

INNO29206

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

Rolling Line

Comerio Ercole/meccaniche Moderne/condux HM 45/60 LA

Germany

2004

used

on request

INNO29205

A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible.

Granulate Line

Henschel/alpine FM 350 C/B40-73 RO

Germany

unknown

used

on request

INNO29204

A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arburg/netstal/demag

Germany

2007

used

on request

INNO29187

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible.

Temperature Control Unit

Gwk weco 09 A

Germany

2009

used

on request

INNO29116

Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.

Drying Chamber

Matair EF 50 E

Germany

2004

used

on request

INNO29112

Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible.

Glass Frame Saw

Haffner GL 172

Germany

1995

used

on request

INNO29057

Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.

Injection Moulding Machine

Stork ST 13000-1200

Germany

1991

used

on request

INNO29007

Clamping force: 12,000kN, opening force: opening stroke: closing speed: 1030mm/s, max. mold weight: 22.5t, max. platen dimensions: 1900x1950mm, tie bar diameter: 220mm, ejection force: 130kN, screw diameter: 133mm, injection pressure: 1445bar, width: 3500mm, length: 14,745mm, height: 2740mm. With documentation. On-site inspection is possible.

Injection Moulding Machine

Demag ergotech 35-115 EXTRA

Germany

unknown

used

on request

INNO28970

Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible.

Single-Screw Extruder

Zambello/kreyenborg/trendelkamp KEP 60-30-N

Germany

2016

used

on request

INNO28961

Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible.

Blown Film Line

Kiefel Worms FSBK 500/50.25D/70.29D/80.25D

Germany

2001

used

on request

INNO28930

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible.