Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email

A reliable partner at your side for used machinery from Germany

More
Innovac used-machines Latest Offers  [1 - 20 of 2480]
Hammer-Mill-Rematec-RPM-650-K20.0 used
Hammer Mill
Rematec RPM 650/K20.0
Germany
2020
used
on request
INNO29158
A Rematec hammer mill as good as new is available. Engine type: AlphaOne OMT-1-280M4, engine power: 108kW, engine speed: 1785rpm. Documentation available. On-site inspection is possible.
more
Vacuum-Deep-Drawing-Machine-Geiss-T8-DU used
Vacuum Deep-Drawing Machine
Geiss T8 DU
Germany
2008
used
on request
INNO29157
A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.
more
CNC-Milling-Machine-Geiss-ECO-FZ used
CNC Milling Machine
Geiss ECO FZ
Germany
2008
used
on request
INNO29156
A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible.
more
Compressor-Atlas-Copco-GA30VSD+FF used
Compressor
Atlas Copco GA30VSD+FF
Germany
2014
used
on request
INNO29155
Two identical Atlas Copco compressors are available. Volume flow: 5.87m³/min, power requirement: 39.66kW, speed: 7300rpm, oil capacity: 20l, operating hours: approx. 50000h. Documentation available. On-site inspection is possible.
more
CNC-Lathe-Gildemeister-MDW-33-x-2000 used
CNC Lathe
Gildemeister MDW 33 x 2000
Germany
1981
used
on request
INNO29154
An older CNC lathe Gildemeister is available. Turning diameter: 650mm, turning length: 2000mm, control: Siemens EPM, operating hours: 73347h. Including one steady rest and one tailstock. The steady rest has a crack. Documentation available. On-site inspection is possible.
more
Dough-Rolling-Machine-New-Dell-TFL-610 used
Dough Rolling Machine
New Dell TFL 610
Germany
2025
used
on request
INNO29153
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
more
Tablet-Deduster-Fette-Compacting-Gratex used
Tablet Deduster
Fette Compacting Gratex
Germany
2012
used
on request
INNO29152
A mobile tablet deduster Fette Compacting GmbH for the gentle removal of dust particles and burrs from freshly pressed tablets or capsules is available. Speed: 120 rpm, sieve drum length: approx. 300mm, sieve drum diameter: approx. 135mm, inlet dimensions X/Y: approx. 100mm/90mm, outlet dimensions X/Y/Z: approx. 60mm/40mm/35mm, machine dimensions X/Y/Z: approx. 800mm/350mm/1000mm, weight: approx. 35kg. Documentation available. On-site inspection is possible.
more
CNC-Glass-Processing-Machine-Mdi-MP500-CE used
CNC Glass Processing Machine
Mdi MP500-CE
Germany
2009
used
on request
INNO29151
A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
more
Skimmed-Milk-Steamer-Msr used
Skimmed Milk Steamer
Msr
Germany
1967
used
on request
INNO29150
A plant for the production of skimmed milk is available. Production capacity: 15000l/h, evaporation ratio: 65%, connected load: 90kW, control: Siemens S7, control year: 2006, including a cooling tower from 2020, documentation available. On-site inspection is possible.
more
CNC-Circular-Grinding-Machine-Rollomatic-RPG used
CNC Circular Grinding Machine
Rollomatic RPG
Germany
2015
used
on request
INNO29149
A hydraulically operated Rollomatic precision plunge-cut grinding machine is available. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm-6.35mm, shank diameter range: 1mm-6.35mm, total workpiece length range: 30mm-60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6000rpm, workpiece speed: 800rpm. Machine dimensions X/Y/Z: approx. 1100mm/800mm/1300mm, weight: approx. 600kg. The machine has only processed about 1500 workpieces. Documentation available. On-site inspection is possible.
more
Multistage-Press-Nedschroef-BS-3 used
Multistage Press
Nedschroef BS 3
Germany
1976
used
on request
INNO29148
Wire diameter range: 6-10mm, dies: 4, steps: 7, cut-off length: 75mm, underhead shank length: 50mm, max. width across flats: 17mm, max. thread length: 50mm, production capacity: 285 pieces/min, pressing force: 110t. Documentation available. An on-site inspection is possible.
more
Multistage-Press-Hatebur-BKA-2 used
Multistage Press
Hatebur BKA 2
Germany
1990
used
on request
INNO29147
A Hatebur cold former for wire processing is available. Wire diameter range: 6mm-14mm, dies: 4, steps: 5, cutting length: 125mm, underhead shank length: 15mm-102mm, max. width across flats: 17mm, production speed: 120 pieces/min, pressing force: 100t, machine weight: approx. 12000kg. An on-site inspection is possible.
more
Belt-Conveyor used
Belt Conveyor
Germany
unknown
used
on request
INNO29146
A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.
more
Belt-Conveyor-Stöber-K21R-90-S4-TLB-960 used
Belt Conveyor
Stöber K21R 90 S4 TLB 960
Germany
unknown
used
on request
INNO29145
An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.
more
Stenter-Frame-Brückner used
Stenter Frame
Brückner
Germany
1986
used
on request
INNO29144
A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible.
more
Injection-Moulding-Machine-Boy-22-SVV-dipronic used
Injection Moulding Machine
Boy 22 SVV dipronic
Germany
1987
used
on request
INNO29143
A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible.
more
Counting-Machine-Mtf-lauper-MR-S1-LQ-100 used
Counting Machine
Mtf/lauper MR-S1/LQ 100
Germany
2017
used
on request
INNO29142
A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.
more
Belt-Conveyor-Dmg-Mori-B-F7003 used
Belt Conveyor
Dmg Mori B-F7003
Germany
unknown
used
on request
INNO29141
A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.
more
3D-Printer-Ultimaker-S5 used
3D Printer
Ultimaker S5
Germany
2018
used
on request
INNO29140
A total of 10 (ten) Ultimaker 3D printers including material stations are available. Printing technology: Fused Deposition Modeling (FDM), extruder: dual extrusion with automatic nozzle lift system and exchangeable print cores (AA/BB), nozzle diameter: 0.25mm/0.4mm/0.8mm, build space dimensions X/Y/Z: 330mm/240mm/300mm. Layer resolution: 0.25mm nozzle: 60µm-150µm, 0.4mm nozzle: 20µm-200µm, 0.8mm nozzle: 20µm-600µm, filament diameter: 2.85mm, print bed temperature range: 20°C-140°C. Materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway and other third-party materials. Documentation available. On-site inspection is possible. Only package sale possible.
more
Remaining-Stock-Elumatec-graule-eisele-AF-AS-ZS-170N-Pressta-2000 used
Remaining Stock
Elumatec/graule/eisele AF/AS/ZS 170N/Pressta 2000
Germany
2009
used
on request
INNO29139
A total of five metal and profile processing machines from various manufacturers are available. 1) End milling machine Elumatec AF, year of manufacture: 2003, max. milling range: 400mm, max. tool diameter: 280mm, milling cutter bore: 40mm, max. profile height: 165mm, max. milling height: 140mm, max. milling depth: 110mm, max. milling length: 400mm, speed: 2800/min, stroke: 550mm. Machine dimensions X/Y/Z: approx. 1550mm/900mm/1000mm, weight: approx. 250kg. 2) End milling machine Elumatec AF, year of manufacture: 2011, max. milling range: 400mm, max. tool diameter: 280mm, milling cutter bore: 40mm, max. profile height: 165mm, max. milling height: 140mm, max. milling depth: 110mm, max. milling length: 400mm, speed: 2800/min, stroke: 550mm. Machine dimensions X/Y/Z: approx. 1550mm/900mm/1000mm, weight: approx. 250kg. 3) Single-spindle copy router Elumatec AS, year of manufacture: 2011, travel X/Y/Z: 230mm/90mm/110mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 600mm/550mm/1300mm, weight: approx. 120kg. 4) Mitre circular saw Graule ZS 170N, year of manufacture: 1998, saw blade diameter: 420mm, saw blade bore: 40mm, saw blade speed: 3350rpm, dust extraction nozzle diameter: 95mm. Cutting width and height at 90°: 410mm/170mm, cutting width and height at 45°: 290mm/115mm. 5) Corner press Eisele Pressta 2000, year of manufacture: 2009, pressing force: 32kN, punching stroke: 17mm, max. installation height: 150mm, max. profile height: 210mm, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 900mm/1200mm/750mm. Documentation available. On-site inspection is possible.
more
Innovac Gebrauchtmaschinen Our Program
Agricultural-machines 1
Automation-technology 64
Beverage-filling-technology 30
Complete-production-lines 2
Construction-machinery 23
Energy-management 132
Food-processing-and-beverage 137
Material-storage 73
Materials-handling-technology 59
Measurement-and-testing 53
Medical-equipment 5
Metal-processing-machines 937
Mining 2
Office-equipment 2
Other-machines 71
Packaging-machines 197
Pharmaceutical-and-cosmetics 19
Plastics-processing-machines 177
Printing-machines 74
Process-equipment-and-chemistry 143
Packaging-material-machinery 72
Robotics 37
Surplus-goods 4
Textile-machinery 75
Utility-vehicles 15
Woodworking-machines 76