Innovac GmbH Used machines from Germany
Innovac used-machines Energy management [61 - 80 of 153]
Asynchronous-Three-Phase-Induction-Motor-Vem-DSRAN-7132-8WF used
Asynchronous Three-Phase Induction Motor
Vem DSRAN 7132-8WF
Germany
2010
used
on request
INNO30324
Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich.
Electric-Motor-Vem-DSRAN-8033-6WF used
Electric Motor
Vem DSRAN 8033-6WF
Germany
2014
used
on request
INNO30302
An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible.
Boiler-Plant-Polytechnik-LS-2000-DG used
Boiler Plant
Polytechnik LS 2000 DG
Germany
1997
used
on request
INNO30279
A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible.
Boiler-Plant-Polytechnik-PR-2000 used
Boiler Plant
Polytechnik PR 2000
Germany
2000
used
on request
INNO30278
A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible.
Chiller-Kratschmayer-CW-C11R0411CP used
Chiller
Kratschmayer CW-C11R0411CP
Germany
2023
used
on request
INNO30267
A complete Kretschmeyer chilled water system is available. Cooling capacity: 40.7kW, medium temperature inlet/outlet: 12°C/6°C, max. operating pressure low pressure/high pressure: 18bar/28bar, test pressure low pressure/high pressure: 26bar/40bar, refrigerant: R290, refrigerant charge: 4300g. Machine dimensions X/Y/Z: approx. 2800mm/1350mm/2350mm, weight: approx. 1050kg. Including hydraulic module, cooling water circulation pump, buffer tank, and remote maintenance module (monitoring package). Documentation available. An on-site inspection is possible.
Steam-Boiler-Weishaupt-WM-G30-1-A used
Steam Boiler
Weishaupt WM-G30/1-A
Germany
2017
used
on request
INNO30211
Two Weishaupt gas burners including two WMG boilers are available. Output: 2x3.3MW. Documentation available. An on-site inspection is possible.
Chiller-Daikin-EWQ009ACW1P used
Chiller
Daikin EWQ009ACW1P
Germany
2010
used
on request
INNO30186
A small Daikin chiller with inverter is available. Refrigerant: R410A, refrigerant charge: 2.95kg, max. operating pressure high/low side: 4MPa/3MPa, max. water pressure: 3bar, weight: approx. 180kg. Documentation available. An on-site inspection is possible.
Refrigerating-plant-Hyfra-Alpha-34-2-W-S used
Refrigerating plant
Hyfra Alpha 34-2-W-S
Germany
2021
used
on request
INNO30185
Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Chiller-Ers-SC-22.0-VS used
Chiller
Ers SC 22.0 VS
Germany
2014
used
on request
INNO30184
A refrigeration unit ERS is available. Refrigerant: R407C, refrigerant quantity: 13kg, heat inlet/outlet temperature: 15°C/20°C, cooling capacity: 25580W, tank volume: 360l, pump capacity at 390kPa: 4.4m³/h, max. operating pressure low/high: 22bar/29bar. Machine dimensions: approx. 1650mm/900mm/2000mm, weight: approx. 930kg. Documentation available. An on-site inspection is possible.
Burner-Weishaupt-WM-G10-3-A-monarch used
Burner
Weishaupt WM-G10/3-A monarch
Germany
2017
used
on request
INNO30128
Fuel: Natural gas, power range: 100kW-1000kW, connection pressure range: 15mbar-500mbar, NOx class: 2. An on-site inspection is possible.
Compact-Gear-Motor-Lenze-g500-B600 used
Compact Gear Motor
Lenze g500-B600
Germany
unknown
used
on request
INNO30095
Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.
Combined-Heat-and-Power-Plant-Kw-Energie-smartblock-50 used
Combined Heat and Power Plant
Kw Energie smartblock 50
Germany
2016
used
on request
INNO29921
Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message engine too hot. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation.
Gas-Burner-Elco-VG-5.950-M-TC used
Gas Burner
Elco VG 5.950 M/TC
Germany
2024
used
on request
INNO29871
A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.
Air-Heater-Kroll-LH-630-LH-530-LH-430-LH-420-LH-330 used
Air Heater
Kroll LH 630/ LH 530/ LH 430/ LH 420/ LH 330
Germany
unknown
used
on request
INNO29828
A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.
Three-Phase-Motor-Menzel-MBR-500-M used
Three-Phase Motor
Menzel MBR 500 M
Germany
unknown
used
on request
INNO29688
A high-voltage motor MENZEL (formerly ASEA) is available. Voltage: 5000V, current: 68.6A, power: 500kW, power factor: 0.77, speed: 591rpm, thermal class: F, protection class: IP54, weight: approx. 4700kg. Documentation available. An on-site inspection is possible.
Motor-Loher-DSW-500LB-10A used
Motor
Loher DSW-500LB-10A
Germany
2000
used
on request
INNO29687
An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.
Emergency-Generator-Elin-sgp-S2506-S12 used
Emergency Generator
Elin/sgp S2506/S12
Germany
unknown
used
on request
INNO29624
An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.
Motor
Weg 37kW 2P 200M/L WFX2
Germany
2021
used
on request
INNO29391
An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.
Refrigerating-Machine-Engie-NX-W-0302 used
Refrigerating Machine
Engie NX-W 0302
Germany
2017
used
on request
INNO29323
Refrigerant: R410a, refrigerant capacity: 10kg, oil type: RL32 3-MAF, oil capacity: 6.8l, max. low/high pressure: 29.5bar/45bar, cooling capacity: 76.9kW, weight: approx. 520kg. Documentation available. On-site inspection is possible.
Gearbox-Thyssen-polysius-wgw-KS-027,5-N-45PS used
Gearbox
Thyssen/polysius/wgw KS/027,5/N 45PS
Germany
1990
used
on request
INNO29235
Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.