Innovac GmbH Used machines from Germany
Innovac used-machines Energy management [41 - 60 of 125]
Pure-Steam-Generator-Stilmas-PSG-1500-DTS used
Pure Steam Generator
Stilmas PSG 1500 DTS
Germany
2002
used
on request
INNO27721
Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.
Diesel-Three-Phase-Current-Aggregate-Volvo-stamford-steyr-TAD1631GE-HCI544F1-17S230 used
Diesel Three-Phase-Current Aggregate
Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230
Germany
2024
used
on request
INNO27715
A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.
Steam-Plant-Reining used
Steam Plant
Reining
Germany
2000
used
on request
INNO27710
A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.
Pure-Steam-Generator-Finn-Aqua-500-H1 used
Pure Steam Generator
Finn Aqua 500 H1
Germany
1986
used
on request
INNO27674
Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.
Surface-Cooler-Heatcraft-Europe-FC-PU06 used
Surface Cooler
Heatcraft Europe FC PU06
Germany
unknown
used
on request
INNO27520
A surface cooler with various small appliances is available. 1) Surface cooler Heatcraft Europe FC PU06DL02D3 1C4 33 B, volume flow: 62dm³. 2) KSB pump, year of manufacture: 2020, output: 4kW. 3) Lifting machine for coil holder Oerlikon HM-2529. 4) Blower Ferrari FR 1001 N04S/3RD 90, year of manufacture: 2019, speed: 1500 rpm, max. temperature: 100°C, power: 75kW. Documentation available. On-site inspection is possible.
Low-Voltage-System-Feag-Energoline used
Low Voltage System
Feag Energoline
Germany
2015
used
on request
INNO27517
Rated current: 2250A, rated impulse current: 75kA/125kA, degree of protection cabinet/floor: IP20/IP00, protection class: SK1, cable entry: bottom, main lines: 400V/230C AC, control lines: 110V DC, signal lines: 110V DC, number of panels: 7, panel equipment: panel 1: 4x NH00, panel 2: 2x NH1, panel 3: 2x NH2, panel 4: 2x NH3, panel 5-6: Siemens WLII 2000S+ETU25B, panel 7: Siemens BR6000 compensation. Documentation available. On-site inspection is possible.
Refrigerant-Dryer-Spx-hankison-kaeser-HHD470-AS-35 used
Refrigerant Dryer
Spx/hankison/kaeser HHD470/AS 35
Germany
2009
used
on request
INNO27488
A Kaeser screw compressor and a Hankison compressed air refrigeration dryer (SPX) are available. 1) Hankison HHD470 compressed air refrigeration dryer, year of manufacture: 2009, refrigerant: R407C, refrigerant quantity: 1.1kg, volume flow: 470m³/h, machine dimensions X/Y/Z: approx. 1000mm/450mm/800mm. 2) Kaeser AS 35 screw compressor, year of manufacture: 1985, output: 22kW, volume flow: 3.06m³/min, operating overpressure: 10bar, operating hours: 54577h, machine dimensions X/Y/Z: approx. 800mm/1500mm/110mm. On-site inspection is possible.
Plate-Heat-Exchanger-Alfa-Laval-thermofin-M10-TBN used
Plate Heat Exchanger
Alfa Laval/thermofin M10/TBN
Germany
2019
used
on request
INNO27451
There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.
Refrigerating-Plant-Gohl-DT-27-Z-FM12 used
Refrigerating Plant
Gohl DT 27 Z-FM12
Germany
1999
used
on request
INNO27450
Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.
Steam-Boiler-System-Bosch-weishaupt-ECO-1-UL-S-2000-WM-L20 used
Steam Boiler System
Bosch/weishaupt ECO 1/UL-S 2000/WM-L20
Germany
2021
used
on request
INNO27425
A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.
Rotary-Converter-Siemens-schuckert-AVG-267D used
Rotary Converter
Siemens-schuckert AVG 267D
Germany
unknown
used
on request
INNO27167
A Siemens rotary converter (pendulum machine) is available. Generator operation: max. voltage: 600V, max. current: 343A, speed: 6000rpm, power consumption: 220kW. Motor operation: max. voltage: 520V, max. current: 315A, speed: 5000rpm, power output: 148kW.
Chiller-Mta-TAE-EVO used
Chiller
Mta TAE EVO
Germany
2008
used
on request
INNO27153
Coolant: R407C, coolant capacity: 5500kg, permissible operating pressure: 6bar, max. temperature: 35°C, max. sound pressure level: 70, ambient temperature min./max.: -5°C/43°C, weight: approx. 330kg.
Combined-Heat-and-Power-Plant-Man-daimler-Benz-krauter-12-Zylinder-8-Zylinder used
Combined Heat and Power Plant
Man/daimler Benz/krauter 12 Zylinder/8 Zylinder
Germany
unknown
used
on request
INNO27139
A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport.
Steam-Boiler-Kessel-loos-saacke-Bischofsofen-ESSR8-L used
Steam Boiler
Kessel-loos/saacke Bischofsofen/ESSR8 L
Germany
1967
used
on request
INNO27075
Test pressure: 13bar, volume: 790kg, capacity: 4000kg/h, heating surface: 100m², total system dimensions X/Y/Z: approx. 5600mm/3700mm/3850mm. Includes an oil-gas industrial burner Saacke ESSR8 L. An on-site inspection is possible. Expected to be available from September 2025.
Compressor-and-Refrigerant-Dryer-Gea-Grasso-OS3 used
Compressor and Refrigerant Dryer
Gea Grasso OS3
Germany
2007
used
on request
INNO26863
Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg.
Screw-Compressor-Kaeser-SK19 used
Screw Compressor
Kaeser SK19
Germany
1997
used
on request
INNO26819
Power: 11kW, Voltage: 230/460Volt, 3-Phase, max. Operating Pressure: 10bar, Flow Rate: 1.5m³/min, max. Flow Rate: 1.92m³/min (68 CFM), Flow Rate at Max. Pressure: 1.27 m³/min (45CFM). Dimensions (Length/Width/Height): 812,8mm/762mm/1041,4mm
Compressor-Compair-hydrovane-beko-CompAir-F36M used
Compressor
Compair/hydrovane/beko CompAir F36M
Germany
unknown
used
on request
INNO26741
Several compressors from the manufacturers Hydrovane and Beko are available. The compressors are only sold as a package deal. Individual machines cannot be sold separately.
Transformer-Sgb-DTTHL-630-20 used
Transformer
Sgb DTTHL 630/20
Germany
2004
used
on request
INNO26734
There are 2 identical SGB transformers available. Theoretical power: 630kVA, peak power: 340kVA, average power: 300kVA. The transformers are only sold as a package deal. Individual machines cannot be sold separately.
Combined-Heat-and-Power-Plant-Senertec-Dachs-G-5.5 used
Combined Heat and Power Plant
Senertec Dachs G 5.5
Germany
2011
used
on request
INNO26721
Electrical output: 5.5kW, thermal output: 14.8kW, max. heat output: 20.5kW. max. flow temperature: 95°C, max. return temperature: 70°C, operating pressure: 5bar. Dimensions X/Y/Z without controller: approx. 1000mm/720mm/1070mm, weight: 530kg, operating hours: 66,773h, fuel: natural gas. Including condenser and MSR 2 control. Documentation available.
Three-Phase-Cast-Resin-Transformer-Ritz-DTR105000 used
Three-Phase Cast Resin Transformer
Ritz DTR105000
Germany
2019
used
on request
INNO26639
Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible.