▷ Used energy management from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Energy management

Air conditioning 1 Block heats 6 Components and accessories 4 Compressed-air 26 Emergency power generators 2 Gas technology 3 Generators 3 Heat exchanger 3 Heating and blowers 6 Motors and turbins 14 Refrigerator cooling 33 Steam boilers 13 Switchgears and controlgears 2 Transformer 11

Innovac used-machines

Energy management [1 - 20 of 127]

Combined Heat and Power Plant

Kw Energie smartblock 50

Germany

2016

used

on request

INNO29921

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation.

Air Cooler

Hydac OSCA 1L/10/1.3/M/A/1

Germany

unknown

used

on request

INNO29918

Two identical and unused Hydac air coolers in original packaging are available. Air volume flow: approx. 600m³/h, pump speed: 1000rpm, max. medium viscosity: approx. 2000mm²/s, medium: hydraulic oil/mineral oil, motor power: 0.25kW, pump flow rate: 10l/min, pump displacement: approx. 10cm³/rev, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Refrigerating plant

Climaveneta NECS/D/B/S 0302

Germany

2012

used

on request

INNO29915

A Climaveneta chiller is available. Cooling capacity: 73.8kW, power consumption: 27.6kW, compressors: 2, refrigeration circuits: 1, refrigerant: R410A, refrigerant charge: 10.2kg, heat recovery: cooling capacity 76.6kW/heating capacity 23.3kW. Machine dimensions X/Y/Z: approx. 2200mm/1150mm/1450mm, weight: approx. 680kg. Documentation available. An on-site inspection is possible.

Ventilation System

Wolf KG 40

Germany

unknown

used

on request

INNO29914

A Wolf ventilation system with supply and exhaust air units is available. 1) Supply air unit Wolf KG 40, air volume flow: 3000m³/h, pressure loss (external): 300Pa, heating capacity: 25.7kW, cooling capacity: 18.4kW, motor power: 3kW, motor speed: 2890rpm. 2) Exhaust air unit Wolf KG 40, air volume flow: 2000m³/h, pressure loss (external): 300Pa, motor power: 0.75kW, motor speed: 2855rpm. Documentation available. An on-site inspection is possible.

Gas Burner

Elco VG 5.950 M/TC

Germany

2024

used

on request

INNO29871

A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.

Air Heater

Kroll LH 630/ LH 530/ LH 430/ LH 420/ LH 330

Germany

unknown

used

on request

INNO29828

A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.

Low-Voltage Motors

Siemens SIMOTICS SD 1LE5/ 1LE1

Germany

2021

used

on request

INNO29810

A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible.

Three-Phase Motor

Menzel MBR 500 M

Germany

unknown

used

on request

INNO29688

A high-voltage motor MENZEL (formerly ASEA) is available. Voltage: 5000V, current: 68.6A, power: 500kW, power factor: 0.77, speed: 591rpm, thermal class: F, protection class: IP54, weight: approx. 4700kg. Documentation available. An on-site inspection is possible.

Motor

Loher DSW-500LB-10A

Germany

2000

used

on request

INNO29687

An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.

Transformer

Sbg DOTZ 1000/20

Germany

1994

used

on request

INNO29659

Power: 1000kVA, primary voltage: 20800V, secondary voltage: 6240V, vector group: Dyn5, cooling type: ONAN, rated current: 28.9/96.2, oil weight: 790kg, machine weight: approx. 3000kg. An on-site inspection is possible.

Emergency Generator

Elin/sgp S2506/S12

Germany

unknown

used

on request

INNO29624

An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.

Heating Unit

Kleindienst 3-294/3-174/3-1194

Germany

1994

used

on request

INNO29607

Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.

Plate Heat Exchanger

Schmidt Sigma 37H37

Germany

1981

used

on request

INNO29538

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

Dual-Fuel Burner

Weishaupt RGL 70/1-A

Germany

1990

used

on request

INNO29433

A Weishaupt dual-fuel burner is available. Fuel: gas/fuel oil, gas type: N, category: I, set pressure min./max.: 30bar/180bar, heat output: 850kW-8550kW, oil throughput: 150kg-720kg/h, fuel oil: EL, engine output: 14kW, machine dimensions X/Y/Z: approx. 2100mm/1400mm/900mm. On-site inspection is possible.

Motor

Weg 37kW 2P 200M/L WFX2

Germany

2021

used

on request

INNO29391

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

Refrigerating Machine

Engie NX-W 0302

Germany

2017

used

on request

INNO29323

Refrigerant: R410a, refrigerant capacity: 10kg, oil type: RL32 3-MAF, oil capacity: 6.8l, max. low/high pressure: 29.5bar/45bar, cooling capacity: 76.9kW, weight: approx. 520kg. Documentation available. On-site inspection is possible.

Gearbox

Thyssen/polysius/wgw KS/027,5/N 45PS

Germany

1990

used

on request

INNO29235

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Burner

Weishaupt/seibold WC 500

Germany

2022

used

on request

INNO29234

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Combined Heat and Power Plant

Senertec KHA-G S1

Germany

2005

used

on request

INNO29207

A SenerTec CHP unit is available. Heat output: 11.8kW-12.5kW, max. flow and return temperature: 85°C/70°C, operating overpressure: 5bar, rated electrical output: 5.5kW, power factor: 0.88, max. fuel input: 21.3kW, fuel: natural gas II. Machine dimensions X/Y/Z: 1100mm/750mm/1000mm, weight: approx. 500kg, control: Travis 5475 (5400 series). Documentation available.

Water Cooling Machine

Hyfra VWK 50/1-S

Germany

2005

used

on request

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.