Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Measurement and testing
Balancing machines 1 Local positioning technology 35 Material testing 14 Measuring systems 25 Other machinery 7 Test bench 1
Innovac used-machines Measurement and testing [41 - 60 of 83]
CNC-Coordinate-Measuring-Machine-Keyence-VL-500-VL-570 used
CNC Coordinate Measuring Machine
Keyence VL-500/VL-570
Germany
2023
used
on request
INNO30884
A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
more
Climate-Chamber-Wolf-Stahlbau-WLE-B-K-90-140 used
Climate Chamber
Wolf Stahlbau WLE-B-K 90/140
Germany
1995
used
on request
INNO30791
Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible.
more
Flow-Meter-Krohne-Optimass-6400-F used
Flow Meter
Krohne Optimass 6400 F
Germany
2019
used
on request
INNO30785
A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Mitutoyo-Crysta-Apex-C-7106 used
CNC Coordinate Measuring Machine
Mitutoyo Crysta Apex C 7106
Germany
2012
used
on request
INNO30521
A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible.
more
Testing-System-Spitzenberger-Spies-EMV-D-30000-PAS used
Testing System
Spitzenberger Spies EMV D 30000/PAS
Germany
unknown
used
on request
INNO30475
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
more
Measuring-Device-Man-200KN-9606 used
Measuring Device
Man 200KN/9606
Germany
1984
used
on request
INNO30394
Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.
more
Measuring-Device-Amsler-Wolpert-40-THZ-–-400KN used
Measuring Device
Amsler Wolpert 40 THZ – 400KN
Germany
1979
used
on request
INNO30392
Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.
more
Optical-Measurement-System-Keyence-IM-6120 used
Optical Measurement System
Keyence IM-6120
Germany
unknown
used
on request
INNO30243
An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.
more
CNC-Three-Coordinate-Measuring-Machine-Wenzel-RS-30-12-15-CNC used
CNC Three-Coordinate Measuring Machine
Wenzel RS 30-12-15 / CNC
Germany
1992
used
on request
INNO30212
X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation.
more
Mooney-Viscometer-Alpha-Technologies-MV2000 used
Mooney Viscometer
Alpha Technologies MV2000
Germany
unknown
used
on request
INNO30175
An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.
more
Rheometer-Alpha-Technologies-MDR-2000 used
Rheometer
Alpha Technologies MDR 2000
Germany
unknown
used
on request
INNO30174
A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.
more
Network-Analyzer-Hp-8753D-3325A used
Network Analyzer
Hp 8753D/3325A
Germany
unknown
used
on request
INNO30142
Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.
more
X-ray-Inspection-System-Mekitec-Meki-D4 used
X-ray Inspection System
Mekitec Meki D4
Germany
2015
used
on request
INNO30074
An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.
more
Single-Flank-Testing-System-Gleason-13-Zoll-Power-Gear-T. used
Single Flank Testing System
Gleason 13-Zoll Power Gear T.
Germany
2005
used
on request
INNO30030
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
more
Drying-and-Warming-Cabinet-Binder-ED-400-KBF-115 used
Drying and Warming Cabinet
Binder ED 400/KBF 115
Germany
unknown
used
on request
INNO30014
Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-RSplus-1825 used
CNC Coordinate Measuring Machine
Wenzel RSplus 1825
Germany
2016
used
on request
INNO29683
Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Lk-Altera-M used
CNC Coordinate Measuring Machine
Lk Altera M
Germany
2023
used
on request
INNO29675
Travel X/Y/Z: 1000mm/1500mm/800mm, max. length measurement error: 1.5 + L/375, max. single-point error: 1.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-87 used
CNC Coordinate Measuring Machine
Wenzel LH 87
Germany
2012
used
on request
INNO29674
Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-87 used
CNC Coordinate Measuring Machine
Wenzel LH 87
Germany
2006
used
on request
INNO29673
Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-65 used
CNC Coordinate Measuring Machine
Wenzel LH 65
Germany
1999
used
on request
INNO29672
Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 3
Automation-technology 64
Beverage-filling-technology 40
Complete-production-lines 3
Construction-machinery 33
Energy-management 153
Food-processing-and-beverage 171
Material-storage 70
Materials-handling-technology 82
Measurement-and-testing 83
Medical-equipment 22
Metal-processing-machines 1251
Mining 7
Office-equipment 4
Other-machines 60
Packaging-machines 253
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 189
Printing-machines 104
Process-equipment-and-chemistry 176
Packaging-material-machinery 88
Robotics 31
Surplus-goods 5
Textile-machinery 109
Utility-vehicles 13
Woodworking-machines 104