Innovac GmbH Used machines from Germany
Innovac used-machines Measurement and testing [21 - 40 of 53]
Multisensor-Measuring-Machine-Mahr-MarVision-MS662 used
Multisensor Measuring Machine
Mahr MarVision MS662
Germany
unknown
used
on request
INNO27836
Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.
Tool-Preset-System-Kelch-Seca-04-E used
Tool Preset System
Kelch Seca 04 E
Germany
2011
used
on request
INNO27629
Travel X/Z: 400mm/500mm, tool holder: SK50, machine dimensions X/Y/Z: approx. 1000mm/360mm/1130mm, weight: approx. 275kg. Including tool adapter from SK50 to SK40 and VDI40. Control defective, but can be replaced according to the manufacturer. On-site inspection is possible.
3D-Production-Measuring-System-Keyence-XM-T2200 used
3D Production Measuring System
Keyence XM-T2200
Germany
2018
used
on request
INNO27363
Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Various accessories included. Documentation available.
Fully-Automatic-X-Ray-Inspection-Anritsu-XR75 used
Fully Automatic X-Ray Inspection
Anritsu XR75
Germany
2018
used
on request
INNO27312
A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.
Hydraulic-Testing-System-Niehues-DN200-DN600 used
Hydraulic Testing System
Niehues DN200-DN600
Germany
2019
used
on request
INNO27302
A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.
CNC-Coordinate-Measuring-Machine-Tesa-MH3D-DCC used
CNC Coordinate Measuring Machine
Tesa MH3D DCC
Germany
2008
used
on request
INNO27253
Measuring range X/Y/Z: 440mm/700mm/410mm, measuring uncertainty X/Y/Z: 2.5+3.9L/1000µm, probing deviation (MPEp): 3µm. Acceleration: 1730mm/s², traversing speed: 350mm/s, max. table load: 200kg, working temperature range: 19°C-21°C, operating temperature range: 13°C-35°C, air consumption: 21l/min, weight: approx. 400kg, control: Hexagon PC-DMIS. Documentation available. The coordinate measuring machine must be recalibrated.
CNC-Coordinate-Measuring-Machine-Mora-Mytos used
CNC Coordinate Measuring Machine
Mora Mytos
Germany
2005
used
on request
INNO26935
Measuring range X/Y/Z: 3000mm/1800mm/6000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible.
Profilometer-Keyence-VR-5200 used
Profilometer
Keyence VR-5200
Germany
2019
used
on request
INNO26798
Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.
Optical-Measurement-System-Keyence-IM-6125 used
Optical Measurement System
Keyence IM-6125
Germany
unknown
used
on request
INNO26781
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).
Climate-test-chamber-Feutron-Klimasimulation-KPK-900l used
Climate test chamber
Feutron Klimasimulation KPK 900l
Germany
2008
used
on request
INNO26599
Test chamber volume: 900 l, Temperature range: -40°C - +100°C, humidity range: 10 - 98, Test chamber weight: 750kg, refrigeration system weight: 480kg. Refrigerant, refrigerant quantity and operating pressure: R134a/0.8kg/18bar, R507/4.0kg/27bar, R23/1.0kg/27bar
3D-Coordinate-Measuring-Machine-Keyence-XM-M1200 used
3D Coordinate Measuring Machine
Keyence XM-M1200
Germany
2020
used
on request
INNO26562
X-axis: +/-100mm, measuring range: 600x300x200mm, max. workpiece weight: 25kg, the machine is as good as new, an on-site inspection is possible.
Pump-Test-Stand-Etewe-Gmbh used
Pump Test Stand
Etewe Gmbh
Germany
2006
used
on request
INNO26540
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible.
Universal-Crack-Detection-Machine-K+d-Flux-technic used
Universal Crack Detection Machine
K+d Flux-technic
Germany
unknown
used
on request
INNO26245
Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible.
Rheometer-Göttfert-ELASTOGRAPH-67.85 used
Rheometer
Göttfert ELASTOGRAPH 67.85
Germany
1987
used
on request
INNO26128
Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible.
Web-Inspection-System-Bst-webscope-B60-10-G used
Web Inspection System
Bst webscope B60-10-G
Germany
2008
used
on request
INNO26095
There are two identical machines available, year of construction machine 1/ 2: 2003/ 2008, with documentation, were part of a flexo printing machine Fischer & Krecke 16S/10.
Optical-3D-Coordinate-Measuring-Machine-Keyence-VL-500 used
Optical 3D Coordinate Measuring Machine
Keyence VL-500
Germany
2022
used
on request
INNO25751
Connected load: 200VA, with documentation, the device was hardly used.
Helium-Leak-Tester-Gmg-Automation used
Helium Leak Tester
Gmg Automation
Germany
1997
used
on request
INNO25543
Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation.
Shielding-Box-Emc-technik-and-Consulting-Gmbh used
Shielding Box
Emc-technik & Consulting Gmbh
Germany
2012
used
on request
INNO25475
Shielding box for electromagnetic compatibility, length: 728mm, width: 520mm, height: 520mm, with full absorber lining (ferrite absorber), 10x feed-through filters (banana sockets), BNC feed-through, cold device feed-through (filtered), Sub-D feed-through (filtered), waveguide feed-through for optical cables, double EMC seal, antenna feed-through (conduit feed-through), shielding attenuation and two gas pressure springs.
3D-Structured-Light-Scanner-Hexagon-smartSCAN-HE-RE8-LED used
3D Structured Light Scanner
Hexagon smartSCAN-HE RE8 LED
Germany
2017
used
on request
INNO25321
Includes measuring field S-075, calibration plate S, strip projection system LED (blue), 128 LP, lenses, 2x high-resolution 8. 0 MPixel digital camera with GigE interface, 3296x2472 pixels, lenses, filters, optoLINKII controller with USB interface, 10m cable, upgrade to integrated rack computer Intel® Xeon® processor, 64bit, 32GB RAM, 1TB SATA HDD, DVD +/-rw, graphics card, OPTOCAT measurement and evaluation software for Windows, laser pointer, flight case, closed system housing, M rotary/swivel unit with three-jaw chuck, certification for optical measurement system and system acceptance according to VDI / VDE 2634, the machine was hardly used.
Hardness-Testing-Machine-Otto-Wolpert-werke-DiaTestor-3a used
Hardness Testing Machine
Otto Wolpert-werke DiaTestor 3a
Germany
1973
used
on request
INNO25083
Max. test load range: 750kg, with documentation and accessories.