Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Measurement and testing
Local positioning technology 24 Material testing 14 Measuring systems 16 Other machinery 10 Test bench 1
Innovac used-machines Measurement and testing [1 - 20 of 65]
X-ray-Inspection-System-Mekitec-Meki-D4 used
X-ray Inspection System
Mekitec Meki D4
Germany
2015
used
on request
INNO30074
An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.
more
Single-Flank-Testing-System-Gleason-13-Zoll-Power-Gear-T. used
Single Flank Testing System
Gleason 13-Zoll Power Gear T.
Germany
2005
used
on request
INNO30030
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
more
Drying-and-Warming-Cabinet-Binder-ED-400-KBF-115 used
Drying and Warming Cabinet
Binder ED 400/KBF 115
Germany
unknown
used
on request
INNO30014
Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.
more
Drop-Tester-Lansmont-PDT-80M used
Drop Tester
Lansmont PDT 80M
Germany
unknown
used
on request
INNO30012
A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.
more
Spectrophotometer-Datacolor-800 used
Spectrophotometer
Datacolor 800
Germany
2020
used
on request
INNO30007
A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible.
more
Hardness-Testing-Machine-Mitutoyo-Durotwin-Plus-963 used
Hardness Testing Machine
Mitutoyo Durotwin Plus 963
Germany
unknown
used
on request
INNO29919
Scales: Rockwell/Rockwell Superficial, max. workpiece height: approx. 180mm, max. test depth: approx. 165mm, dwell time: approx. 3s, data output: Digimatic/RS-232-C, machine dimensions X/Y/Z: approx. 250mm/520mm/780mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible.
more
Universal-Oven-Memmert-UF30 used
Universal Oven
Memmert UF30
Germany
2020
used
on request
INNO29819
Operating temperature: 10-300°C, setting temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN class A, 4-wire measurement, control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air motor, exhaust air, program runtime, time zones), electronically controllable air turbine adjustable in 10% steps, fresh air via adjustable exhaust flap with preheating, exhaust port with throttle valve electronically controllable, logging: storage in case of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optional via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. inserts: 3, max. load: 60kg, max. load per insert: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has hardly been used. An on-site inspection is possible.
more
Weight-Per-Unit-Area-Measuring-System-Scantech-ULO03 used
Weight Per Unit Area Measuring System
Scantech ULO03
Germany
2020
used
on request
INNO29768
A thickness measuring device Scantech is available. Measuring frame width: 2500mm, sensor power: 5keV-15keV, max. web width: 2100mm, max. web speed: 200m/min, product tolerance at 57µm-63µm: +/-5%, measuring accuracy at 60µm: +/-0.3µm, max. ambient temperature: 45°C, orientation: Left-B. Machine dimensions X/Y/Z: approx. 3250mm/300mm/900mm, weight: approx. 400kg, control: Flexscan 6, interface: OPC-UA. Components: scanner, HMI, IO box, and various small parts. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Schut-Geometrical-Metrology-DeMeet-400 used
CNC Coordinate Measuring Machine
Schut Geometrical Metrology DeMeet-400
Germany
2005
used
on request
INNO29759
X-axis: 400mm, Y-axis: 250mm, Z-axis: 200mm, table dimensions: 560x426mm, acceleration: 500mm/s², resolution: 0.1μm, measuring temperature: 20 ±0.5°C, max. workpiece weight: 50kg. Length: 930mm, width: 870mm, height: 1570mm, weight: 530kg. On-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-RSplus-1825 used
CNC Coordinate Measuring Machine
Wenzel RSplus 1825
Germany
2016
used
on request
INNO29683
Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Lk-Altera-M used
CNC Coordinate Measuring Machine
Lk Altera M
Germany
2023
used
on request
INNO29675
Travel X/Y/Z: 1000mm/1500mm/800mm, max. length measurement error: 1.5 + L/375, max. single-point error: 1.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-87 used
CNC Coordinate Measuring Machine
Wenzel LH 87
Germany
2012
used
on request
INNO29674
Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-87 used
CNC Coordinate Measuring Machine
Wenzel LH 87
Germany
2006
used
on request
INNO29673
Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-65 used
CNC Coordinate Measuring Machine
Wenzel LH 65
Germany
1999
used
on request
INNO29672
Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LG-54 used
CNC Coordinate Measuring Machine
Wenzel LG 54
Germany
2001
used
on request
INNO29671
Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Vision-Measuring-System-Mitutoyo-QS-250Z used
CNC Vision Measuring System
Mitutoyo QS-250Z
Germany
2001
used
on request
INNO29618
A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Zeiss-Eclipse-7-7-5-cnc used
CNC Coordinate Measuring Machine
Zeiss Eclipse 7/7/5 cnc
Germany
1996
used
on request
INNO29528
Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Keyence-VL-500 used
CNC Coordinate Measuring Machine
Keyence VL 500
Germany
2023
used
on request
INNO29486
A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Keyence-XM-1000 used
CNC Coordinate Measuring Machine
Keyence XM-1000
Germany
2019
used
on request
INNO29296
A Keyence optical CNC 3D coordinate measuring machine is available. Measuring range X/Y/Z: 300mm/250mm/150mm, max. table load: 25kg, repeatability: +/-3µm, measuring uncertainty: +/-8µm, min. display distance: 1µm, min. angle: 0.0001°, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.
more
Tool-Preset-System-Zoller-Venturion-500 used
Tool Preset System
Zoller Venturion 500
Germany
2005
used
on request
INNO29224
A high-precision, modular Zoller V420DZ presetting and measuring machine for rotating tools is available. Measuring range X/Z: 220mm/500mm, max. tool diameter: 420mm, max. tool weight: 45kg, machine dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 1150kg. Including base frame, PC, monitor, printer and measuring software. Documentation available. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 2
Automation-technology 64
Beverage-filling-technology 24
Complete-production-lines 1
Construction-machinery 23
Energy-management 126
Food-processing-and-beverage 134
Material-storage 70
Materials-handling-technology 62
Measurement-and-testing 65
Medical-equipment 6
Metal-processing-machines 978
Mining 3
Office-equipment 2
Other-machines 68
Packaging-machines 212
Pharmaceutical-and-cosmetics 18
Plastics-processing-machines 180
Printing-machines 76
Process-equipment-and-chemistry 159
Packaging-material-machinery 71
Robotics 36
Surplus-goods 5
Textile-machinery 93
Utility-vehicles 10
Woodworking-machines 87