Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Process equipment and Chemical plants
Blowers 4 Centrifuges 7 Chamber filter-press 1 Compressors 21 Decanter 1 Filter systems 40 Mills 9 Mixing machines 40 Other machinery and plants 17 Paper production 1 Presses 1 Pumps 9 Storage containers and tanks 15 Water treatment equipment 12
Innovac used-machines Process equipment and Chemical plants [41 - 60 of 178]
Suction-Unit-Vaupel-Wavaso-VHF-S-1.6-2.2-2.5 used
Suction Unit
Vaupel Wavaso VHF-S-1.6/2.2-2.5
Germany
2014
used
on request
INNO31253
A vibration and hose filter system Vaupel is available. Air volume flow: 3200m³/h, motor power: 3kW, speed: 2300rpm, filter area: 9m². An on-site inspection is possible.
more
High-Capacity-Filtration-System-Polo-Filter-technik-SBEV-B1.4 used
High Capacity Filtration System
Polo Filter-technik SBEV-B1.4
Germany
2014
used
on request
INNO31252
A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
more
Compressor-System-German-Blast-BT-220 used
Compressor System
German Blast BT-220
Germany
2011
used
on request
INNO31217
A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.
more
Mixing-System-Berents-Becomix-B3-MV150 used
Mixing System
Berents Becomix B3 MV150
Germany
2017
used
on request
INNO31172
First vessel chamber pressure min./max.: -0.1MPa/0MPa, max. second vessel chamber pressure: 0.4MPa, min. process temperature: 0°C, max. vessel chamber process temperature 1/2: 100°C/152°C, vessel chamber volume 1/2: 241l/27l, vessel chamber test pressure 1/2: 0MPa/0.77MPa. Documentation available. An on-site inspection is possible.
more
Fine-Impact-Mill-Alpine-630-UP used
Fine Impact Mill
Alpine 630 UP
Germany
1980
used
on request
INNO31146
An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible.
more
Mixing-System-Lödige-FKM-300-D used
Mixing System
Lödige FKM 300 D
Germany
1962
used
on request
INNO31115
A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.
more
Mixing-System-Werner-and-Pfleiderer-Simplex-14 used
Mixing System
Werner & Pfleiderer Simplex 14
Germany
unknown
used
on request
INNO31114
A universal batch mixer WP is available. Volume: approx. 140l, machine dimensions X/Y/Z: approx. 1500mm/900mm/1200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.
more
Mixing-System-Engelsmann-CM-500 used
Mixing System
Engelsmann CM 500
Germany
unknown
used
on request
INNO31113
A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption. Expected to be available 2026.
more
Mixing-System-Mixaco-CM1000-D used
Mixing System
Mixaco CM1000-D
Germany
2002
used
on request
INNO31096
A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible.
more
Mixing-System-Wam-WBHP-15000 used
Mixing System
Wam WBHP 15000
Germany
2013
used
on request
INNO31072
A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.
more
Mixer-Eirich-R15-RV-15 used
Mixer
Eirich R15/ RV 15
Germany
1996
used
on request
INNO31062
Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available.
more
Suction-and-Filtering-System-Ivat-Profi-Tower-RS-28.000K used
Suction and Filtering System
Ivat Profi-Tower RS 28.000K
Germany
2019
used
on request
INNO31051
Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
more
Mixing-Station-Cavicchi-180RC used
Mixing Station
Cavicchi 180RC
Germany
1991
used
on request
INNO31037
A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.
more
Suction-Unit-Kiekens-Dustmaster-4000 used
Suction Unit
Kiekens Dustmaster 4000
Germany
unknown
used
on request
INNO30986
A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.
more
Compressor-Atlas-Copco-GA37 used
Compressor
Atlas Copco GA37
Germany
2005
used
on request
INNO30942
A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.
more
Hydraulic-Unit-Lippold-BNK250-FCMP-200L used
Hydraulic Unit
Lippold BNK250/FCMP 200L
Germany
2012
used
on request
INNO30941
Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.
more
Compressor-Boge-C-15-LDR-350 used
Compressor
Boge C 15 LDR-350
Germany
2017
used
on request
INNO30908
An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.
more
Mixing-System-Konus used
Mixing System
Konus
Germany
unknown
used
on request
INNO30892
A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.
more
Multipurpose-Cell-Rampf-MC-EASY used
Multipurpose Cell
Rampf MC-EASY
Germany
unknown
used
on request
INNO30871
Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power.
more
Multipurpose-Cell-Rampf-MC-EASY used
Multipurpose Cell
Rampf MC-EASY
Germany
unknown
used
on request
INNO30868
Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power.
more
Innovac used machines from Germany Our Program
Agricultural-machines 3
Automation-technology 60
Beverage-filling-technology 40
Complete-production-lines 3
Construction-machinery 33
Energy-management 151
Food-processing-and-beverage 167
Material-storage 70
Materials-handling-technology 80
Measurement-and-testing 77
Medical-equipment 21
Metal-processing-machines 1226
Mining 7
Office-equipment 4
Other-machines 61
Packaging-machines 253
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 204
Printing-machines 105
Process-equipment-and-chemistry 178
Packaging-material-machinery 87
Robotics 31
Surplus-goods 5
Textile-machinery 109
Utility-vehicles 13
Woodworking-machines 104