Innovac GmbH Used machines from Germany
Innovac used-machines Process equipment and Chemical plants [101 - 120 of 143]
Screw-Compressor-Atlas-Copco-GX5FF-EP used
Screw Compressor
Atlas Copco GX5FF EP
Germany
2019
used
on request
INNO26851
There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available.
Mixer-Invent-HYPERCLASSIC-HCM used
Mixer
Invent HYPERCLASSIC HCM
Germany
2011
used
on request
INNO26656
This mixer was used in a paper factory for stirring waste water. Diameter: 2300mm, direction of rotation: left, speed: 22rpm. Agitator body: Hyperboloid with glass fiber reinforced plastic. Motor: Siemens LA100ZLP4EW, Gearbox: Siemens FZAF108B. Total weight: approx. 270kg, drive shaft: DN150, length: 5332mm. Documentation available. On-site viewing is possible.
Water-Treatment-System-Glastechnik-Holger-Kramp-CLEAN-60-SPS-VISU-H2 used
Water Treatment System
Glastechnik Holger Kramp CLEAN 60 SPS VISU H2
Germany
2014
used
on request
INNO26581
Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.
Ball-Mill-Fryma-MSM-50 used
Ball Mill
Fryma MSM-50
Germany
1994
used
on request
INNO26553
Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available.
Batch-Mixer-M-tec-MR-150V used
Batch Mixer
M-tec MR 150V
Germany
1995
used
on request
INNO26523
Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible.
Circular-Feeder-Rieter-werke used
Circular Feeder
Rieter-werke
Germany
unknown
used
on request
INNO26404
Motor power: 5.5kW, accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible.
Paper-Making-Machine used
Paper Making Machine
Germany
2015
used
on request
INNO26195
This is an inclined wire paper machine for the production of filter nonwovens, filter paper, insulation paper, membrane carriers, cardboard, tablecloths and more, speed: 5-120m/min, flow rate: 2500-20,000l/min, the manufacturers are various companies from Canada, Ukraine and Europe, some modifications have been made to the system such as a new shredder, larger vacuum pump, vibrating screen for water treatment, second headbox, new distributor and more, an inspection is possible.
Mixer-Reimelt-Henschel-FM-250 used
Mixer
Reimelt Henschel FM 250
Germany
1971
used
on request
INNO26034
Capacity: 250l, weight: 1.75t, an inspection is possible.
Mixer-Thyssen-Henschel-FM-350C used
Mixer
Thyssen Henschel FM 350C
Germany
1982
used
on request
INNO26016
An inspection is possible, the machine needs to be overhauled.
Steel-Enamelled-Agitator-Tank-Thale-BE-10000-AM used
Steel Enamelled Agitator Tank
Thale BE 10000-AM
Germany
2002
used
on request
INNO25915
There are three identical agitator tanks available, capacity: 10,000l, operating overpressure inner tank/ jacket: -1 to 6/ 6bar, diameter: 2500mm, height: 3180mm, weight: 10.5t, with motor, gearbox, lantern, barrier pressure system and documentation, the tanks were used for 15 years.
Stainless-Steel-Tank-V.m.-Fabrications-Ltd. used
Stainless Steel Tank
V.m. Fabrications Ltd.
Germany
1997
used
on request
INNO25865
Capacity: 2173l, diameter: 1500mm, height: 1230mm.
Stainless-Steel-Tank-Spegel used
Stainless Steel Tank
Spegel
Germany
1991
used
on request
INNO25864
Capacity: 6200l, diameter: 2250mm, height: 2400mm.
Double-Screw-Bunker used
Double-Screw Bunker
Germany
unknown
used
on request
INNO25801
Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022.
Grinding-Plant-Neumannn-and-Esser-Gmbh-PM-00-O1 used
Grinding Plant
Neumannn & Esser Gmbh PM 00 O1
Germany
2018
used
on request
INNO25731
Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years.
Molecular-Screen-Adsorber-Sagemis used
Molecular Screen Adsorber
Sagemis
Germany
unknown
used
on request
INNO25467
The system consists of a fixed-bed molecular sieve adsorber in combination with a rotary molecular sieve adsorber, volume flow: 45,000Nm³/h, exhaust air temperature: 20-60°C.
Wastewater-Treatment-Efa-Chemie-EFAMAT-PC-300-Alpha used
Wastewater Treatment
Efa Chemie EFAMAT PC 300 Alpha
Germany
2011
used
on request
INNO25370
Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.
Dissolver-Draiswerke-Gmbh-RN-2-30 used
Dissolver
Draiswerke Gmbh RN 2/30
Germany
1983
used
on request
INNO25191
Hydraulic pressure: 150bar, connected load: 32kW, including two containers.
Vibrating-Screen-Gough-Engineering-GV2-2SAN used
Vibrating Screen
Gough Engineering GV2 / 2SAN
Germany
1999
used
on request
INNO25124
There are two identical vibrating screens available.
High-Speed-Separator-Alfa-Laval-IFB-403X-73 used
High Speed Separator
Alfa Laval IFB 403X-73
Germany
2021
used
on request
INNO24915
Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation.
Cartridge-Dust-Collector-Donaldson-DFO-4-48 used
Cartridge Dust Collector
Donaldson DFO 4-48
Germany
2015
used
on request
INNO24901
Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much.