▷ Used process equipment and chemical plants from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Process equipment and Chemical plants

Blowers 5 Centrifuges 8 Compressors 23 Decanter 1 Filter systems 38 Mills 10 Mixing machines 30 Other machinery and plants 14 Paper production 1 Presses 1 Pumps 10 Storage containers and tanks 17 Water treatment equipment 6

Innovac used-machines

Process equipment and Chemical plants [1 - 20 of 164]

Air Filtration Plant

Trotec Tac 6500

Germany

2020

used

on request

INNO30588

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Vacuum Pump

Busch R5 RA 0305 D

Germany

2012

used

on request

INNO30580

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Double Jacket Storage Tank

Möschle Kühltank

Germany

1996

used

on request

INNO30574

Two identical insulated double-jacket cooling tanks Möschle are available. Vessel volume: 15500l, jacket volume: 60l, max. jacket pressure: 3bar, max. medium temperature: 50°C, min. medium temperature vessel/jacket: 18°C/10°C, diameter: 2650mm, overall height: 4800mm. Including permanently installed agitators. An on-site inspection is possible.

Filter Press

Schenk Orion 60x60

Germany

unknown

used

on request

INNO30572

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

Stirring Tank

Speidel RO-Z-100-S

Germany

1999

used

on request

INNO30565

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

Bead Mill

Ruitong WM-30A

Germany

unknown

used

on request

INNO30560

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Remaining Stock

Bwt/weishaupt Bewados/L1Z-B

Germany

2008

used

on request

INNO30542

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.

Compressor

Atlas Copco/schneider/donaldson GA 18/DK 3000 N/Ultrasep plus 30

Germany

1994

used

on request

INNO30529

A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Fuel Oil Tank

Tankschutz Philipp Doppelwand

Germany

2018

used

on request

INNO30473

An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.

Coolant-Lubricant Treatment

Wendt Typ 800 L CC 61

Germany

2015

used

on request

INNO30398

Offered is a coolant system type 800L CC 61 year 2015 with integrated centrifuge WZ 95 SP year 2016. Tank capacity approx. 880l, pump delivery rate 160l/min, nominal volume flow 800-1200m³/h. Including cooling unit ET 55 V with refrigerant R134a HP max. 24bar/LP max. 13bar. Inspection possible by arrangement.

Wetbench-System

Robotechnik Europe OPTIwet ST30

Germany

unknown

used

on request

INNO30389

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

Compressor

Sbn MSA 15/10-5000I VRG2

Germany

2015

used

on request

INNO30343

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

Blower

Robuschi Robox ES 35/2C-RVP

Germany

2016

used

on request

INNO30333

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.

Mixing Silo

Kreyenborg USM 8M3 ST

Germany

2015

used

on request

INNO30328

Three identical mixing silos are available. Usable volume: 8m³, total volume: approx. 10m³, cylinder diameter: 1500mm, speed: 30rpm. An on-site inspection is possible.

Dosing Machine

Wittmann Feedmax BS/6-315-50

Germany

2016

used

on request

INNO30326

Seven identical dosing units, including two suction stations (blowers) Wittmann, are available. 1) 7x plastic granulate dosing unit Wittmann Feedmax BS/6-315-50, year of manufacture: 2015, container volume: 15l, container diameter: 300mm, installation height: approx. 800mm, empty weight: approx. 15kg. 2) Blower Wittmann GS/6 05-XSB-50, year of manufacture: 2016, power: 2.2kW, vacuum line: DN50, negative pressure: 300mbar, conveying capacity: approx. 250kg/h, weight: approx. 92kg. Documentation available. An on-site inspection is possible.

High Pressure Pump

Bft HPI 4000/30

Germany

unknown

used

on request

INNO30312

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

Dewatering System

Celtec SP 400

Germany

2016

used

on request

INNO30260

A screw press for dewatering purposes is available. Screw diameter: 400mm, residual moisture range: 35%-45%, throughput range: 1t-4t/h, weight: approx. 4400kg. Documentation available. An on-site inspection is possible.

Bead Mill

Netzsch Mini Cer

Germany

2015

used

on request

INNO30256

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Compressor

Atlas Copco Automan HP 5.5

Germany

unknown

used

on request

INNO30236

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

Compressor

Blitz Monsun 22

Germany

2001

used

on request

INNO30195

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.