Used Metal processing machines from Germany

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [41 - 60 of 800]

Rolling Ring Lathe

Herkules WD 450s x 4000

Germany

1965

used

on request

INNO26665

Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.

Cold Circular Saw

Kaltenbach KKS 400H

Germany

2015

used

on request

INNO26663

Segment saw blade: 400mm x 4mm x 50mm. Working range: round material 90°/45°: 130mm, square material 90°/45°: 120mm/110mm, flat material 90°/45°: 305mm x 20mm/245mm x 30mm, U-profile upright 90°/45°: 120mm x 55mm, U-profile horizontal 90°/45°: 240mm x 85mm/180mm x 70mm. Cutting speed with saw blade 400mm in m/min: 13/26 or 10/20 or 15/30. Feed rate: 0-3300mm/min. Dimensions X/Y/Z: 800mm/1070mm/1780mm, weight: approx. 850kg. Available from June, 2024. Documentation available. On-site inspection is possible.

CNC Milling Machine

Deckel FP3A

Germany

1990

used

on request

INNO26659

Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.

Soundproof Cabin

Sws

Germany

1999

used

on request

INNO26657

Sound level reduction: 22dB(A) +/-2dB(A). Pressure difference monitoring, substructure crane system, two-stage motor. System in working order. Documentation available.

Vertical Machining Center

Trimill DEPOSPEED

Germany

2005

used

on request

INNO24621

X-travel: 1000mm, y-travel: 1100mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-14,000/min, weight: 16t, operational hours counter controls/ machine/ spindle: 16,337/ 74,372/ 37,827.

Vertical Machining Center

Quick Jet DEPO-JET

Germany

2002

used

on request

INNO24622

X-travel: 1200mm, y-travel: 800mm, z-travel: 700mm, max. load: 1.5t, rotational speed: 1-14,000/min, operational hours counter controls/ machine/ spindle: 41,351/ 133,865/ 60,163h.

Vertical Portal Milling Machine

Trimill VC 1810

Germany

2012

used

on request

INNO24623

X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h.

Parts Cleaning System

Bupi Golser Powertec DB7HP

Germany

2013

used

on request

INNO26651

Partial cleaning machine used in the production of machines. Max. Current consumption: 134.7A, total connected load: 78.4kW. Additional descaling system, 4 trolleys for loading and 2 spare pumps. Documentation available.

Press

Heilbronn REP 50

Germany

1985

used

on request

INNO26646

Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms.

CNC Milling Machine

Hurco VMX 50t

Germany

2013

used

on request

INNO26645

Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible.

Knuckle-Joint Press

Gräbener GKMP 360

Germany

1984

used

on request

INNO26640

Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg.

Centering Machine

Carl Zeiss LZ80 S

Germany

1977

used

on request

INNO26635

It is still in working order, but nothing has been produced with it for a long time. On-site inspection is possible.

Vacuum Processing Plant

Veb Hochvakuum Dresden B90.1

Germany

1976

used

on request

INNO26634

Vacuum chamber volume: 0.62m³, weight: 2800kg, cooling water requirement: 700l/h. On-site inspection is possible.

Filter System

Donaldson DFO 4-24

Germany

2017

used

on request

INNO26638

Expected particle size: 0.5-50µm, dust consistency: dry and free-flowing. Operating temperature: <40°C, relative humidity: <50% (in volume flow), max. operating volume flow: 16600Bm³/h. Dust content before filter/after filter: <1g³/m / ≤1mg/m³. Process: Extraction of a flame cutting system(4700m³/h) + plasma cutting system(6900m³/h) + deburring machine(5000m³/h). Weight: 1375kg.

Surface Grinding Machine

Stankoimport 3D711

Germany

unknown

used

on request

INNO26636

Max. grinding length: 620 mm, Sanding width: 200 mm, Max. Workpiece height: 350 mm. Spindle speed: 1,380 rpm. Magnetic clamping plate dimensions 200 mm x 600 mm, weight: 3000 kg. On-site viewing is possible.

Revolver Lathe

Bwf DAR 46

Germany

unknown

used

on request

INNO26633

Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.

Column Drilling Machine

Stankoimport 2H135

Germany

1980

used

on request

INNO26632

Max. Drilling diameter: 35 mm, Distance from spindle axis to column: 300 mm, Max. Spindle stroke: 250 mm, Max. Through-feed drill head: 170 mm. Table top dimensions: 450x500 mm, Number of spindle speeds: 12 from 31.5 - 1400 rpm, Overall machine dimensions: 1030х835х2535 mm, Weight: 1200 kg. On-site inspection is possible.

Lathe

Carl Zeiss Jena

Germany

1979

used

on request

INNO26630

It is still functional, but nothing has been produced with it for a long time. Inner radii and outer radii from 6 to 289 mm. Production examples in the pictures.

Revolver Lathe

Prvomajska BRT-50M

Germany

1970

used

on request

INNO26629

Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time.

Horizontal Drilling and Milling Machine

Union BFT

Germany

1992

used

on request

INNO26623

Travel X/Y/Z: 1000mm/1250mm/800mm, quill stroke: 500mm, max. workpiece weight: 4000kg. Clamping surface length/width: 1000mm/1250mm, T-slot width/spacing: 22H7/125mm. Drill spindle diameter: 102mm, tool holder: A50 DIN 2080. Spindle speeds (3 rows, infinitely variable): 4-1600 min^-1. Max. feed X/Y/Z/W axes in mm/min: 6000/6000/6000/4000. max. feed B-axis: 0-2.5min^-1. Space requirement: 17.35m², net mass: 10,400kg.