▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [561 - 580 of 995]

Cold Circular Saw

Kasto KKS 400

Germany

unknown

used

on request

INNO28396

Saw blade diameter: 400mm, cutting speed: 28m/min, working height: 1050mm, power: 5kW. Cutting range 90°: round material: 130mm, square material: 120mm/120mm, flat material: 260mm/80mm. Cutting range 45°: round material: 130mm, square material: 110mm/110mm, flat material: 180mm/80mm. Machine dimensions X/Y/Z: approx. 1250mm/1250mm/2000mm, weight: approx. 1200kg. On-site inspection is possible.

Trimming Machine

Mammut BSX-11

Germany

2021

used

on request

INNO28390

A Mammut trimming machine in mint condition for the further processing of drawn and pressed parts including welding device is available. Operating hours: 444h. Including welding device CEA BSW 50, documentation available. On-site inspection is possible.

CNC Cycle Lathe

Gildemeister NEF 720/2000

Germany

unknown

used

on request

INNO28388

Rotation diameter over bed/face slide: 710mm/410mm, turning length: 2000mm, center height: 350mm, spindle bore: 92mm, speed: 1800rpm, quill diameter: 210mm, rapid traverse X/Z: 8m/min/10m/min, feed: 5m/min, feed force: 2000daN. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5600kg. Documentation available. On-site inspection is possible.

CNC Cycle Lathe

Gildemeister NEF 520/1500

Germany

2006

used

on request

INNO28387

Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

CNC Cycle Lathe

Gildemeister NEF 520/1000

Germany

2004

used

on request

INNO28386

Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle diameter: 120mm, speed: 3050rpm, drive power: 12kW, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Mazak FH 6800

Germany

1999

used

on request

INNO28382

Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible.

Punching Line

Helmerding KDH 100

Germany

1997

used

on request

INNO28380

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Coating Line

Wmv TA700

Germany

1996

used

on request

INNO28379

A complete WMV coating system for the surface treatment of bulk materials is available. Charging capacity: approx. 1000kg-2000kg, charging weight per partial batch: 170kg, tray dimensions X/Y/Z: 1200mm/800mm/140mm, control: Siemens S7. Components: Loading and unloading, loading system, charging system, desoldering system, crate washing system, rinsing system, drying system and washing system. One cooling system and one immersion bath are defective. The drying system was extended in 2008 for bulk solids. Documentation available. On-site inspection is possible.

CNC Composite Machining Center

Flow

Germany

2010

used

on request

INNO28378

A complete CNC composite machining center (CMC) for the plastics industry is available. Axes: 13, number of spindles: 1, channel 1: X(U)/Y1/Z1/C1/B1/A1, channel 2: X(U)/Y2/Z2/C2/B2/W21, channel 3: X(U)/W21. Spindle type: S2, temperature sensors: built-in, travel X/Y1/Z1: 15000mm/4550mm/1500mm, C1: +/-270°, B1: +/-180°, rotary axis turning capacity: 45°/s, rapid traverse X/Y/Z: 10m/min, feed X/U: 25m/min, feed Y/Z: 15m/min, feed (manual): 5m/min, control: Siemens 840D. Including 7x flow water jet pumps, Ebbco metalworking filter system and flow abrasive management system. Documentation available. On-site inspection is possible. The entire system is intended as a spare parts carrier.

CNC Milling Machine

Dmg Mori Ultrasonic 20 linear SAUER

Germany

2006

used

on request

INNO28364

A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible.

Welding Cell

Fanuc/wig ARC Mate 100iBe/WIG 300A

Germany

2006

used

on request

INNO28363

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

Hydraulic Shear

Germany

1988

used

on request

INNO28355

A hydraulic swing-cut sheet metal shear of our own construction is available. Cutting dimensions X/Y: 1000mm/500mm, max. sheet thickness: 12mm (15mm), machine dimensions X/Y/Z: approx. 3500mm/2000mm/2800mm, weight: approx. 10000kg. On-site inspection is possible.

Column Drilling Machine

Alzmetall AC32AS

Germany

1994

used

on request

INNO28346

Drilling capacity steel/cast iron: 32mm/40mm, spindle mount: MK4, throat depth: 322mm, quill stroke: 180mm, speed: 5000 rpm, table dimensions X/Y: 500mm/370mm, column diameter: 145mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/2350mm, weight: approx. 520kg.

Wide Belt Sanding Machine

Weber OFZ-M1-900

Germany

1990

used

on request

INNO28344

Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.

Welding Fume Extraction

Plymovent MultiDust Collection

Germany

unknown

used

on request

INNO28343

A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible.

Bar Feeder

Kupa ServoFeed

Germany

2003

used

on request

INNO28338

A Kupa short bar loader is available. Feed length: 1750mm, max. bar length: 1500mm, bar diameter range: 4mm-85mm, power requirement: 1kW, machine dimensions X/Y/Z: approx. 1900mm/900mm/1600mm, weight: approx. 400kg. On-site inspection is possible.

Surface Grinding Machine

Blohm HFS 204

Germany

1973

used

on request

INNO28336

Table dimensions X/Y: 760mm/200mm, max. sanding length: 500mm, max. sanding width: 230mm, table spindle center distance: 520mm, table longitudinal movement: 30m/min, table transverse movement: 16mm/stroke. Grinding wheel diameter: 225mm, grinding wheel width: 25mm, bore: 51mm, power: 5kW. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1950mm, weight: approx. 2100kg. On-site inspection is possible.

Cylindrical Grinding Machine

Karstens

Germany

1974

used

on request

INNO28335

A Karstens cylindrical grinding machine with display is available. Center height: 180mm, grinding diameter: 360mm, center width: 650mm, max. workpiece weight flying/between centers: 70kg/250kg. Grinding wheel outer diameter: 400mm, face diameter: 250mm, peripheral speed: 35m/s, speed: 450rpm, mounting cone: MK4, quill diameter: 50mm, fine adjustment: 0.08mm. Machine dimensions X/Y: approx. 3250mm/2150mm, weight: approx. 3600kg. On-site inspection is possible.

Universal Milling Machine

Deckel FP 2

Germany

2019

used

on request

INNO28334

A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible.

Plate Shear

Helmut Lotze 205.3000x16

Germany

1992

used

on request

INNO28330

Working width: 3040mm, max. sheet thickness: 16mm, upright width: 3040mm, throat depth: 200mm, fence width: 1000mm, motor power: 45kW, stroke rate: 22/min. Documentation available. On-site inspection is possible.