▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [461 - 480 of 1002]

Drill Grinding Machine

Haarmann HSP 50

Germany

1978

used

on request

INNO27511

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

CNC Travelling Column Maching Center

Soraluce FL 6000

Germany

2011

used

on request

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

CNC Plate Drilling Machine

Union BFP 130/7

Germany

1992

used

on request

INNO28577

A Union horizontal drilling and milling machine overhauled in 2009 is available. Spindle diameter: 130mm, tool holder: ISO30, travel X/Y: 11500mm/3000mm, column movement Z: 420mm, drilling spindle movement W: 900mm, facing slide movement U: 320mm, spindle speed: 1000rpm, face support speed: 250rpm. Feed in all axes: 2500mm/min, rapid traverse X/Y: 5000mm/min, rapid traverse Z: 3600mm/min, rapid traverse W/U: 3150mm/min, connected load: 100kW, spindle power: 50kW. Machine dimensions X/Y/Z: approx. 17000mm/3000mm/6500mm, total system weight: approx. 60t, control system: PFP 130 NC. The drives, switchgear and control system were overhauled in 2009. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

Annealing Furnace

Herdieckerhoff STE 300/1000

Germany

1986

used

on request

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

Hardening Oven

Thermconcept KM 590/13

Germany

2013

used

on request

INNO28570

Inner dimensions X/Y/Z: 650mm/1500mm/600mm, outer dimensions X/Y/Z: 1500mm/3000mm/2400mm, volume: 590l, output: 50kW, maximum temperature: 1280°C, weight: approx. 1450kg. The oven shows some signs of use and a few firebricks are broken. Without pneumatic cylinder. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TruMatic L 3003 B

Germany

1992

used

on request

INNO28569

Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Dmg Mori DMC 1035 V

Germany

2010

used

on request

INNO28568

Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible.

Cleaning System

Perkute FR 130

Germany

2006

used

on request

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

Circular Saw

Eisele LMS II HVG-225

Germany

1980

used

on request

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Surface Grinding Machine

Elb-schliff SW 15 VA II

Germany

1985

used

on request

INNO28546

An old ELB surface grinding machine is available. Grinding length: 1500mm, grinding width: 450mm, workpiece height: 340mm, magnetic clamping plate X/Y: 1500mm/400mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76mm, grinding spindle speed: 2890rpm, max. table load: 700kg, machine weight: approx. 5000kg. The drive spindle of the machine must be replaced. Documentation available. On-site inspection is possible.

CNC Machining Center

Grob G350

Germany

2013

used

on request

INNO28537

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

CNC Universal Lathe

Mag Ias DUS 800 ti/6000

Germany

2013

used

on request

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

CNC Press Brake

Fasti 940-200-40

Germany

1998

used

on request

INNO28527

Working width: 4000mm, pressing force: 2000kN, max. operating pressure: 30MPa, connected load: 22.38kW, protective distance: 156mm, holding time: 98ms. Documentation available. On-site inspection is possible.

Edge Milling Machine

Hebrock AKV 83

Germany

1994

used

on request

INNO28523

A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible.

CNC Vertical Turning Machine

Emag VL 5 m LT

Germany

2003

used

on request

INNO28520

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

Trough Dryer

Fst Drytee VE-1

Germany

2013

used

on request

INNO28519

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

Milling Machine

Wmw FSS 315-V

Germany

unknown

used

on request

INNO28515

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

CNC Tool Grinding Machine

Strausak Fleximat 91 CNC

Germany

1991

used

on request

INNO28513

Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible.

CNC Milling Machine

Mazak VTC200-B-II

Germany

2002

used

on request

INNO28511

Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y/Z: 28020mm/655mm/640mm, max. table load: 800kg, speed: 12000rpm, spindle power: 18.5kW, tool holder: SK40, tool positions: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 2850mm/3350mm/2800mm, weight: approx. 6100kg, control: Mazatrol 640M. Documentation available. On-site inspection is possible.

CNC Lathe

Hyundai HD2200

Germany

unknown

used

on request

INNO28510

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.