▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [1 - 20 of 1001]

Sand Blast Machine

Hgh 6040 Duo

Germany

2013

used

on request

INNO29953

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

CNC Reference Hole Drilling Machine

Mach3 Lab Antares 700X-LU

Germany

2009

used

on request

INNO29951

A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

CNC Lathe

Index GU 600

Germany

1991

used

on request

INNO29949

Travel X/Z: 650mm/181.5mm, max. swing diameter over bed: 350mm, max. machining diameter: 230mm, turning length: 600mm, spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 4000rpm, feed: 15m/min, rapid traverse: 15m/min, tool holder: VDI30, tool positions: 12, tailstock taper: SK30, quill stroke: 40mm, weight: approx. 4500kg, control: Siemens Sinumerik 3T. Includes hinged belt chip conveyor. Documentation available. An on-site inspection is possible. Expected to be available from the end of October 2025.

CNC Tool Grinding Machine

Saacke UWIID

Germany

2000

used

on request

INNO29944

A Saacke CNC tool grinding machine including a Felsomat tool loader is available. Center height: 170mm, travel X: 580mm, feed X: 20m/min, table dimensions X/Y: 980mm/185mm, travel Z: 250mm, feed Z: 20m/min, travel Y: 250mm, feed Y: 10m/min. B-axis horizontal swivel: 240°, swivel speed: 120°/s, motor spindle diameter: 170mm, speed: 10000rpm, torque: 10.7Nm. Tool positions: 24, tool holder: HSK-C50, A-axis indexing accuracy: +/-15°, error at 100mm diameter: 8µm, workpiece holder: ISO 50, speed: 50rpm. Control: NUMROTOplus V.3.8.3m, resolution X/Y/Z: 0.0001mm, resolution A/B: 0.0001°. Includes Felsomat Robotal RE 01 loading unit with rotary indexing table, FB703 small extinguishing system, and Brinkmann FBS-238/50 screw spindle pump. Documentation available. An on-site inspection is possible.

Grinding Cell

Shl Schleifroboterzelle

Germany

2012

used

on request

INNO29943

A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.

CNC Milling Machine

Dmg Mori DMU 60 eVo

Germany

2015

used

on request

INNO29940

A DMG Mori CNC 5-axis milling machine is available. Travel X/Y/Z: 600mm/500mm/500mm, table dimensions X/Y: 600mm/500mm, max. workpiece diameter: 600mm, max. workpiece weight: 400kg, B-axis swivel: -5°/+110°, C-axis rotation range: 360°, spindle speed: 18000rpm, spindle taper: HSK-A63, tool positions: 60, spindle power: 35kW, torque: 130Nm, rapid traverse: 50m/min. Machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 10000kg, control: Heidenhain iTNC530 HSCI, operating hours: 49447h, spindle hours: 41561h. Including a robot Yaskawa. Documentation available. An on-site inspection is possible.

CNC Milling Machine

Dmg Mori DMC 60 T

Germany

2007

used

on request

INNO29939

A DMG Mori CNC 5-axis milling machine is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 18000rpm, tool holder: SK40, torque: 125Nm, tool positions: 60. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2200mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 59901h, spindle hours: 44715h. Documentation available. An on-site inspection is possible.

Welding Machine

Jäckle ProTIG 350 DC

Germany

2018

used

on request

INNO29938

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible.

MIG/ MAG Welding Machine

Jäckle MIG 405

Germany

2018

used

on request

INNO29937

5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible.

WIG Welding Machines

Rehm INVERTIG PRO 350 AC/DC compact / 450 DC

Germany

2013

used

on request

INNO29934

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible.

CNC Punch Laser Machine

Trumpf TruMatic 6000

Germany

2008

used

on request

INNO29933

Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025.

Plasma Cutter

Hypertherm powermax 105

Germany

2021

used

on request

INNO29932

A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible.

Sandblasting Machine

Mhg SRA-D1H/D3A-BFS

Germany

2020

used

on request

INNO29931

Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible.

MAG Welding Machine

E/d/e Format M 354 W

Germany

2013

used

on request

INNO29930

10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible.

Welding Machine

Ewm Ag Tetrix 300 Comfort Puls

Germany

2021

used

on request

INNO29928

20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible.

Rolling Mill

Troester WHX 20

Germany

1973

used

on request

INNO29927

A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible.

CNC Lathe

Pittler PV4000/1-2

Germany

2018

used

on request

INNO29926

A Pittler PV4000 CNC large-format vertical lathe is available. Swing diameter: 3800mm, max. workpiece weight: 35000kg, turning diameter: 3800mm, travel X/Z: 2x3200mm/1000mm, rapid traverse X/Z: 32m/20m/min, feed force X/Z: 22kN. Spindle flange diameter: 1900mm, face bearing diameter: 1400mm, spindle diameter: not specified, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 150l/min, water tank volume: 1550l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 3500/3/6/12, outer diameter: 3500mm, height: 500mm, jaw stroke: 55mm, compensation per jaw: +/-6mm, piston stroke: 120mm, max. operating pressure: 60bar, max. total clamping force: 200kN, max. speed: 100rpm, jaw width: 70mm, max. weight: 30000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 150000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF150/1550 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible.

CNC Lathe

Pittler PV2500/1-2

Germany

2021

used

on request

INNO29925

A Pittler CNC large-format vertical lathe is available. Swing diameter: 3000mm, max. workpiece weight: 25000kg, turning diameter: 2800mm, travel X/Y: 2x2700mm/2x1000mm, rapid traverse X/Z: 40m/24m/min, feed force X/Z: 22kN. Spindle flange diameter: 1100mm, face bearing diameter: 800mm, spindle diameter: 360mm, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 400l/min, water tank volume: 2250l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 2500/3/6/12, outer diameter: 2500mm, height: 400mm, jaw stroke: 50mm, compensation per jaw: +/-6mm, piston stroke: 87.5mm, max. operating pressure: 80bar, max. total clamping force: 182kN, max. speed: 170rpm, jaw width: 70mm, max. weight: 10000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 140000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF400/2250 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible.

Column Drilling Machine

Alzmetall AB 35 S

Germany

1978

used

on request

INNO29920

Drilling spindle stroke: 160mm, spindle taper: MK4, spindle speed: 1750rpm, reach: 300mm, feed: 0.3mm/rev, table dimensions X/Y: 620mm/470mm, machine dimensions X/Y/Z: approx. 620mm/950mm/1900mm, weight: approx. 450kg. Includes coolant system and threading device. An on-site inspection is possible.

Plate Shear

Darley GS.3016

Germany

unknown

used

on request

INNO29917

Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible.