Home | Plastics processing machines
Offers 1 - 30 of 73
Plastics processing machines [67]  
Blow moulding machinery [4]  Deep drawing machinery [3]  Dryer [1]  Extruder and extrusion lines [7]  Foil processing machinery [6]  Injection moulding machinery [30]  Mills [1]  Mixer [1]  Other machinery [9]  Polyurethane processing machinery [2]  Presses [2]  Processing and follow-on [2]  Rubber processing machinery [2]  Take-off units [1]  Welding machinery [2]  
ImagePlastics processing machinesNew
Injection moulding machine Arburg 320.210.750
Platen size: 49 x 40cm, distance between tie bars: 32 x 32cm, maximum distance between platen: 60cm, screw diameter: 35mm. There are 3 machines available.
1989 - 1990
Injection moulding machine Krauss Maffei KM 3000 - 13000 A
Screw diameter: 125mm/200mm, injection pressure max.: 1790bar, displacement max.: 7240cm³, plasticizing rate (PS) max.: 6510g, clamping force: 30,000kN, opening force: 1200kN, opening stroke: 1900mm, max. plate separation: 3900mm, tool height min/max: 1150mm/2000mm, distance between tie bars: 2000 x 1700mm, workpiece weight max.: 95,000kg, control: MC 4, footprint machine ca. 22.5 x 4.5m.
1984
Core Cutter Eberle violette CO 2/300/20/2500/VSA2
Inner diameter of core: 30 - 300mm, outer diameter: 340mm, wall thickness: 1 - 20mm, cutting length_ 5 - 2500mm, maximum cutting cycle: 70 cycles/min, automatic core feeding system, lifting and storage system.
1994
Injection moulding machine Engel Insert 300H/90
Constructed without tie bars, screw diameter: 35mm, metering stroke: 160mm, screw speed: 20 - 400r.p.m., nozzle stroke: 420mm, 4 heating zones inclusive nozzle, opening stroke: 350mm, tool height: 100mm min., rotary table diameter: 1200mm.
2006
Injection moulding machine Fahr Bucher SGA 80
Clamping force: 80 t, distance between tie bars: 350 x 350mm, mold height min.: 200mm, screw diameter: 35 mm, plasticizing rate (PS) max.: 128g.
1986
PVC Belling machine Thyssen Nothelfer HAT 160 A
40 - 160 mm, 3 heating stations, 2003 overhauled. Inclusive tools for plastic muffles 50, 75, 85, 100, 125 mm.
1995
Injection moulding machine HPM Next Wave™ 8000 - 5600
Clamping force: 8000kN, opening force: 400kN, opening stroke max.: 1180mm, clamping plate: 1450 x 1450mm, maximum daylight: 2860mm, distance between tie bars: 1010 x 1010mm, mold height min./max.: 400/1180mm, screw diameter: 100mm, injection pressure max.: 1800bar, plasticizing rate (PS) max.: 2790g/min
1996
Injection moulding machine HPM Next Wave™ 5000 - 4000
Clamping force: 5000kN, opening force: 300kN, opening stroke max.: 960mm, clamping plate: 1180 x 1180mm, maximum daylight: 1960mm, distance between tie bars: 820 x 820mm, mold height min./max.: 320/1000mm, screw diameter: 80mm, injection pressure max.: 2300bar, plasticizing rate (PS) max.: 1580g/min
1996
Injection moulding machine Fahr Bucher SGA 90 D
Clamping force: 880kN, opening force: 440kN, opening stroke: 450mm, distance between tie bars: 380 x 380mm, mold height min.: 250mm, injection pressure max.: 2200bar, plasticizing rate (PS) max.: 80kg/h.
1987
Injection moulding machine Battenfeld BK-T 1300/500
Clamping force max.: 1300kN, maximum daylight: 470x470mm, mold height min.: 420mm, plasticizing rate (PS) max.: 45g/s, screw stroke: 200mm, control unit: Unilog 4000.
1990
Injection molding machine Battenfeld BA-T 6500/6300
Design: Two-stage hydraulic clamping system with captive washer. Clamping unit: Clamping force max.: 6500kN, opening force max.: 181kN, distance between tier-bars: 940mm. Injection unit: Injection force max.: 1542kN, screw stroke: 420mm, nozzle contact max.: 222.6kN, nozzle stroke max.: 750mm.
1989
Blown film extrusion line Alpine Kiefel
Feed diameter: 100mm, processes HDPE, MDPE, LDPE (limited) and blends. Width: 300 - 800 mm, thickness: 0.014 - 0.070 mm.
1976
Injection moulding machine Mannesmann Demag ERGOtech 150 NC 4
Type: 150 - 610, clamping force: 1500kN, locking force: 1650kN, tool height: 250mm min., 560mm max., clearance between columns: 500 x 500mm, screw diameter: 45mm, cubic capacity: 323cm³, shot weight: 290g.
1997
Foil sealing machine Guenter ABRL1000
Consisting of: 1 unwinder for 2 roles with two rods and holders for 70/76 reels with brake, 1 working table, with 2 foil holders, 2 spot welding tools (temperature control not included, 1 pair clamping jaws, 1 pair welding jaws, impulse heated, 10mm welding width, 1100mm welding length, 1 cutting station between welding jaws with industrial knifes, welding generator type: SG1612R – 220V – 10A. Tubular film can be welded an also flat foil in 2 layers.
1991
PVC compounding line Werner & Pfleiderer, Meyer, Diossna, Pallmann
Consisting of 1 x weighing and dosing: make: Meyer, y.o.m: 1990, capacity: 2t/h, 1 x mixer: make: Diossna, type: R 600 A, y.o.m.: 1982, capacity: 1.5t/h, 1 x compounder: make Werner & Pfleiderer, type: KP 800, y.o.m.: 1982, capacity: 2t/h. Different new spare double screw and elements available, 1 x Pallmann mill type: PKM 300 can be bought separately. Plasticiser tanks are also available.
1982-90
Stretch blow moulding machine Krones Contiform
Bottle sizes: 0.5 - 1 litre, 16 blowing stations.
1999
PET stretch blow moulding machine ADS G62
With moulds for 500ml and 2 litre bottles.
1994
PET blow moulding machine KRUPP B-80
Overhauled in 2007. Capacity: 1.5 litre bottles: 7000 bottles per hour.
1983
Extruder Krauss-Maffei KMD 2-60 KK
Twin screw, double conical, Screw and barrel: only appr. 5000 hours in operation.
1989
Haul off for pipes and tubes Battenfeld R50 SV
Diameter: up to 63mm.
1996
Granulator Dreher S60/65 SRV
Rotor diameter: 600mm, rotor width: 650mm, with hydraulic conveyor positioners, cooler, 2 conveyors, hydraulic power unit, blower.
1973
Extruder Weber DS 8.5
1 x vacuum calibration table with 3 vacuum pumps and 2 cyclone pumps, length: 8m, 1 x saw and discharge unit.
1980
EPS Molding machine Erlenbach EHV 67/57
Product size: upto 670 x 570mm.
1986
EPS Molding machine Hirsch HE600
Dimension steam chamber: 660 x 510mm.
1995
EPS Molding machine Hirsch HE800
Product dimension: 820 x 620 x 350mm max., table size: 860 x 660mm, cycle time: 28 - 40s, stroke: 715mm. There are different machines avalable.
1995
EPS Molding machine Erlenbach EMH 107/87
Dimension of steam chamber: 1145 x 945mm. There are different machines avalable.
1986 - 1991
EPS Molding machine Erlenbach EHV-C 140/100
Dimension of steam chamber: 1400 x 1000mm.
1996
Injection moulding machines Negri Bossi NB 190, NB 130, NB 100
1 x type NB 190, y.o.m.: 1988, screw diameter: 50mm, clearance between tie bars: 460 x 460mm, mould height: 280 - 460mm; 2 x type NB 130, y.o.m.: 1987 anc 1989, screw diameter; 45mm, clearance between tie bars: 410 x 410mm, mould height: 250 - 410mm, 2 x type NB 100, y.o.m.: 1991 and 1992, screw dieamter: 40mm, clearance between tie bars: 400 x 400mm, mould height: 250mm min.
1988 - 91
Injection moulding machine Boy 50T2
Shot weight: 82g, distance between tie bars: 305 x 305mm, opening stroke: 350mm max., mould height: 250mm min. There are two machines available.
1988
EPP foam moulding machines Teubert TVP 60/60
Steam chamber: 600 x 600mm, for EPP-Sunvisor. There are different machines available.
1998
More offers (Page 1 of 3)